Comments

• 

  Roland S January 29, 2015 at 2:46am

  Thanks for the information...seems like a great idea to use, especially on a fretboard...i´ll see how it goes :)
• 

  Scott aka Farmer Ted January 27, 2015 at 9:24pm

  Pleased to accept, Marcus. Hope the tip for the bridge helped.
• 

  Scott aka Farmer Ted January 27, 2015 at 4:57pm

  yeah Marcus, they can be modded...takes a careful approach, since the new holes have to be drilled directly below the adjustment screw holes...not much room. If you do try, I suggest removing all the other pieces (screws/saddles), and use some lubricating drill tapping oil. This will help a lot. Be sure to drill a hole big enough for the part of guitar string that is twisted around the round knock, but not (of course) larger than the knock. (knock= the round ferrule/ball end of string).

  In my humble opinion, though, a through-body setup provides better sustain.
• 

  Nancy kat January 8, 2015 at 4:36pm

  Hi Marcus I am not sure what you mean? The cat I use on my page is my own. Not sure what other one sorry. Love  the collies to I had a good ole boy for years. Thanks for the friend request! Meeowwwww^^
• 

  Richey Kay July 16, 2014 at 2:37am

  Happy birthday Marcus. Hope you have a peaceful one!
• 

  Malcolm Knight ( Im wit Beard ) June 16, 2014 at 6:17pm

  Just an afterthought Marcus. One of the photos on my page shows the handle pretty good I think. A picture is worth a thousand words they do say.
• 

  Malcolm Knight ( Im wit Beard ) June 16, 2014 at 6:10pm

  Pleased your getting on with your Guitar Case. I look forward to seeing a few pics when finished. Yeah I'm from the West Midlands originally but have lived up here for 40 yrs now. Have a look at my Vid just posted. It shows the country just north of here.

  The way I made the handle was 2 pieces of 5 ply fretted and filed to identical handle shapes with small solid timber blocks glued n screwed at a right angle to there ends. Then a downward screw plus glue to fix to side walls of case.  The inner faces of handles meet flush when case is closed a bit like shopping bag handles.
• 

  Brian MacLean June 11, 2014 at 12:12pm

  Hi Marcus, the inside of the horn is porous and quite brittle, I used a drill press to start a hole all the way through and then filed and sanded until it fit my finger.
• 

  Richey Kay May 29, 2014 at 5:22pm

  Thanks for the friend request Marcus! Greetings from sunny Manchester :-)
• 

  Madmike February 6, 2014 at 4:18pm

  Hi.   ok   who is stew mac?