Gender
Male
Location
Edinburgh
Birthday:
January 12
To go with my electric ukulele project I would also like to make a matching headphone amp that would plug into the output jack a bit like the vox headphone amps . The pickup is a strip type under-saddle piezo and I would like the headphone amp to…
Read more…For some reason the machine heads I bought seem to have long shafts on them so they stick up above the headstock by about 15mm or so to the eye where the strings are threaded through. This has meant that the break angle over the nut is very shallow.…
Read more…Was just getting all ready to string my 3-string CBG up tonight only to find that the middle string going to the upper-most machine head is too short! The other two to the nearer machine heads are fine, just. The string length is 75cm from where…
Read more…Right, so I have a single coil pickup, 2 250k log pots, a .22 capacitor and a jack. I think I need to wire them up along the lines of this. Problem is that I don't really understand the diagram. What do I do with all of those ground connections?…
Read more…
Comments
http://www.axesrus.com/axeElectronicsCaps.htm
here is a good source of wiring diagrams if you ever need any http://www.artecsound.com/wiring/wiring_book01.pdfEnjoy juju :-)
Here's the Hollowbelly Video i was talking about - thought i'd add it here save you searching for it
http://www.cigarboxnation.com/video/hollowbelly-the-1st-uk-cbg
Enjoy
juju :-)
-
1
-
2
of 2 Next