All Posts (1994)

Sort by

The Electric Guitar Made in Prison

fb-600px-width-prison-guitar.jpg?1438348602

When I heard this guitar was built in a prison, I bought it.

This week, I learned the whole story...

The truth is, I've owned this guitar for almost two years.  Late last week, I was looking for a subject to write about in my Guitar World column, so I penned an article about the few details I knew about this guitar.  (Read it here.)

I knew the guitar was built in a Pennsylvania state prison.  I knew the guy's name and, being a guitar builder, I deduced a few facts about its construction.

9353846696?profile=originalThe article was posted online and was read by Mike Argento, a local newspaper writer in York.  Mike's an old friend and a fellow blues guitarist, so it was no surprise when I got a call from him asking if he could write a local perspective on the guitar.

He said he tracked the builder down.

On Tuesday morning, Mike and I drove to the nearby small town of New Oxford, PA and met "Junior Ben," the former inmate who built the guitar back in 1995.  As a music historian, it was one of the first times I came face to face with the builder of a mystery instrument.

It was humbling.

Living in a single room inside battered double-wide trailer (he says it's "prison syndrome"), Junior Ben was still apprehensive about divulging the secrets of this guitar even 15 years after he left prison.  

He was still afraid of being labeled a snitch by the inmates still housed in the prison.

Do yourself a favor and read Mike's article.

The longer I search for old sounds, the more I'm discovering that what I'm really doing is preserving people stories.  Each instrument had a passionate person behind them.  Each song had teardrop.

I think more people should be collecting the stories of the unsung.

I dare ya...

Stay primal.
Shane

carousel-books.jpg?1432870747&width=620
Read more…

The CBG's Infectious Desease Control

Information has leaked out that several underground movements using homemade instruments have surface in rural and highly populated areas around the world!

Surveillance photos are no longer needed with the amount of intel coming in through on line media.

We now know the six strings is no longer our main concern. We’re seeing a mass movements in the 4 & 3 string areas spreading like an infection.

Additionally, Bold buskers strumming their hand strung single string diddley bows in broad daylight. They have form gangs such as THE CANJO LAYANS.

Officials have called in special teams to research this once thought eradicated behavior.

Look for signs around the home of box hording, items missing such as door hinges & old keys.

Does a family member say guitar neck every time they see a tree fall?

The government fears it is losing its grip over it’s media controlled populace.

More people are connecting through music and it appears to be fueled by what they now call the Nation.

We ask you not to panic!

It’s being called The Cigar Box Evolution!

Read more…

First cbg

Just finished my first cigar box guitar. In the true spirit of cigar box guitar making, it ignores all the rules, and therefore has no cigar box, lacking the right sources and the patience to find any. The virus got me hard, after reading David Sutton's book. I'm already planning number 2. Thanks for all the inspiration!
Read more…

Open Mic #6 - Eclectic & Infamous

ec·lec·tic
əˈklektik/
adjective
  1. deriving ideas, style, or taste from a broad and diverse range of sources.

"I was at an open mic the other week and there was a guy playing a TOOL BOX!"

"Yeah!  That's Eric."

That's how I was introduced by Sonny Speed last night at Caffe Lena for the Saratoga Acoustic Blues Society Open Mic.  Hard to believe that I've done this six times now plus a handful of the Folk Open Mic nights.  Someone was telling Sonny about seeing "this guy playing a toolbox."  Likely I'm the only one; at least around Saratoga Springs.

14401_616650828438394_3176118555316492336_n.jpg?oh=30f6870196de6a1989bdc8ab1259a3af&oe=5615A850

It's been a full year since I put myself on a sort of sabbatical leave from working.  A year of no job, 18 credits of Masters degree classes, a lot of guitar practice and a lot of much-needed fun.  To close the 12th month, June was a tough 30 days of applications and interviews for teaching jobs.  After an extremely rigorous process including a second interview that required teaching a 23 eighth graders a lesson on one day's notice, I landed a great position teaching high school chemistry at one of the best districts in the area and it is close to home.

My daughters are home from school with me this summer and they are soaking up as much time as I can give them - a lot.  That put a bit of a damper on me learning three new songs for this month's set and instead of frustrating myself I decided to just pull out a couple reruns.

I started my set with the cover of Gary Clark Jr's "Nextdoor Neighbor Blues" and I have posted a video here of my version.  The original is usually played without a slide, but I use one of my Straight Relic slides to play the same or a similar riff.  I have practiced this a lot and the song went well, I think.

To finish up, I brought out two of the Uncle John songs I played in May.  The crowd liked "Unkind Woman Blues" and I got a lot of laughs throughout "Wiener Dog Run."  I felt really good stepping off the stage.

One of the regular audience members came over to me after my set and said I sounded really good and remarked about the progress I have made compared to when I started.  I know what I have accomplished and how I struggle, but it always feels great to hear from a listener that things are getting better.  Chalk this one up as a good month. Time to start thinking about August . . .with a smile.  

Read more…

Once a month every 3rd Saturday from 9Am till 11AM we meet at the Hwy61roadhouse to share our builds and play as many sounds as we can squeeze in. 

We often mix it up a bit with gift exchanges/swaps and once in a while a member will drop in to give away a stash of boxes or what not.

We decided on a build contest for our next meeting. Three hours may seem like a lot but actually the club has so many things happening at once, before you know it, it's time to go home and you wished for more.

If you're every by Webster Groves MO. in St. Louis on a 3rd Saturday morning. Feel free to drop in to the  hwy61roadhouse.com.

It's open membership and it's free!

Diddley Bow Contest

The contest will consist of two categories.

Lap style & guitar style

Both categories will have a 1st place and runner up.

The entry’s must be present on or before the next Hwy61roadhouse club meeting August 22.

Prizes will be things like a T-shirt, roadhouse Gift card, Delta grooves guitar neck and whatever else we can find stuffed up in the closet.

Good luck and get diddling!

Read more…

Simplify set up with a homemade adjustable bridge.

9353842700?profile=originalThere isn't much about building a cbg that I find tedious but set up can be trying.  I like a fairly low action on fretted cbgs and with that comes the requirement to refine bridge height and usually the nut (slots or overall height).

I was forever shimming or remaking bridge saddles trying to get the right height until I came up with this idea for an adjustable bridge.  

9353843660?profile=original

9353843291?profile=original

The bridge is made of two fine thread, brass machine screws to which a brass rod has been soldered. Nuts are spun onto the screws and the projecting threads are set into a drilled piece of wood that acts as a foot. Height is adjusted at either end of the bridge by putting an 8 mil wrench on the nuts. Like most cbg bridges this one is not glued in place so that you can make some adjustments for intonation. Oh and for nut adjustment I don't spend a lot of time filing slots I make them out of brass threaded rod (softer than steel threaded rod) and simply file the backside to get the height right.

Read more…

Upton Blues Festival 16th to 19th July

Hey Ya'll

Any of you fancy performing at the UK's biggest free Blues Festival?

I'm running an open mic at the Upton Social Club on Friday , your more than welcome to come along bring your chosen intrument and play, enjoy a weekend of Rock & Blues by The River from over 100 top acts, come and be a part of it , pm me if you're interested.

Plenty of camping facilities ,

Get Busy Livin!!

Kev.

Read more…

Forty Ounce Feller

My name's Carroll and I'm a guy.  I say that up front so there's no confusion. This is a story about Forty Ounce Feller.  Forty's birth name is Bobby, but only his momma calls him that. You'll probably figure out the nickname as the story goes on.

I am not on good terms with Forty. We were friendly for a while and then he ripped me off. The old saying, No good deed goes unpunished? I did him a good turn and he payed me back by stealing my lap top, my TV and a few other items he thought might turn a buck. I can't prove it, but I know he done it.  Oh, one thing he took was a good looking Seiko watch. That didn't work.

Forty drinks a crap-ton of beer, mostly Old Milwaukee, and always the 40 ounce bottles. He's a screw-up and a ne'er-do-well.  Petty thievery and BS schemes.  A few years back, he got caught for ripping copper pipe out of an empty house and selling it to some salvage place.  He got less than 50 bucks for the copper, The repair cost some landlord over a thousand.  Forty got probation.

How did he get caught, you might ask?  He left two clues behind.  Two empty forties.

Forty's mom lives across the road from me and Forty lives in her garage.  He has one semi-redeeming thing about him and that is playing bass guitar.  He's incredible.  Good enough to play at any level, but being the shit-head that he is, he's lucky he got to play with a local band.

They're a pretty decent band.  Good guys too, except Forty. The band's name is Hammer & Tongs.  The singer/guitar player is a carpenter and the drummer is a cook.  They have one or two gigs most weekends.  They would round up Forty before a gig and kind of baby-sit him till they took him home after the gig.

Where I first came into the story is that I make license plate guitars.  I gave one to Jason, the guitar player in the band. He used it at some gigs and I was pretty happy about that. Then Forty thought it would be cool if he played a license plate bass.  I was up for that, but it turned out Forty wanted to make his own bass and do it in my shop with my help.

I agreed and then regretted it.  Forty got a good playing bass with a California license plate.  He let me do most of the build.  Then he took it to gigs and told people he made it.

We got friendly building the bass together.  And man, it was fun the few times we played music together.  I don't have anybody around here to play with and Forty made me sound pretty good.  Then he rips me off.  I confronted him and talked to the sheriff.  But like I said, I couldn't prove it.

Not long after that, things changed for Forty.  He usually didn't have a car.   Or sometimes he'd get a five hundred dollar piece of crap and drive it til' the wheels fell off.  He was pretty much unemployable.  Then all of a sudden, he was driving a better kind of car.  Pretty soon that car was gone and he had a nice Dodge pickup. Talk around town was that Forty had money.

Jimmy at the Kwik Stop told me Forty was mowing grass at the new cemetery east of town. And digging graves with a back hoe.   Not a full time job, but making some money.

A new funeral home, Rose Vista, had come into the county seat.  It was part of a small chain.  I heard later on they had four places.  The old funeral home, Paulson's, has been around a long time and is pretty well thought of.  But the new place had a nice building and seemed to do good work. And they were much cheaper than Paulson's.  So they did pretty good.  And right away, they bought ground and started the new cemetery east of the piss-ant little town I live in.

One Friday morning in April, I was up early and went to the Kwik Stop to get a newspaper, breakfast burrito and a 32 ounce Diet Pepsi.  It was just after six AM and Forty was in there bleary eyed, covered with dirt.  He was in there buying two guess whats.

I recalled getting up to pee around midnight and looking out the window and noticing Forty's pickup was home at that time.  I put two and two together and came up with 'What the hell?'

A couple weeks later I was up at two thirty in the morning. As usual, I looked out the window as I peed.  There was Forty leaving in the Dodge and heading east.  At two thirty on a Tuesday morning.

I went back to bed and couldn't sleep.  The worst thing I can do at night is to think about stuff.  I was wondering what Forty was up to.  I pulled on some clothes, grabbed my cell phone and drove out east.

That new cemetery is in a nice secluded spot.  It's surrounded by a game preserve and timber on three sides. You can't really see in there from the road.  But it was dark with low clouds and it looked like headlights were bouncing off the clouds.

I got out of my truck, climbed over the gate and walked up the cemetery lane.  Forty's Dodge and an old van were in there with the motors running and the lights on.  I snuck in there and Forty was running a back-hoe and digging. Another guy was by a grave, giving directions to Forty.  I couldn't believe it.

I went back to my truck, called the 911, and asked them to send a deputy with no lights or sirens.  He got there in nine minutes and we went up the lane and got in close.  There was Forty and another guy loading a casket into the van. The deputy grabbed the other guy and Forty took off running.  I can't run fast or far, but I can outrun Forty.

                                       ~ ~ ~

Forty is in jail.  He'll do around two years.  It's dumb, but I feel kinda bad about it.  The Omaha paper quoted him during the trial as saying, “I am not a body snatcher.”

Well, he was and he wasn't. The scam was to recover and re-sell the coffins and concrete vault liners.  Pretty good money in it too.  How many times can you sell and use a five thousand dollar casket?  

They would put the corpse back in the grave, refill the dirt and tried to hide any sign of disturbance.  Forty's lawyer tried to call the whole thing a 'victimless crime.'   Ha.  I was there that day and the jury laughed out loud at that one.

The guy they brought in as the local funeral director was the brains behind the whole thing. He took the biggest hit. Forty months in the state pen.  

The whole thing was a big scandal.  The grave those guys got caught on, that was the third time they had done it.  

Forty's mom does not seem to blame me.  I spend a lot of time in the wood shop and think of Forty sometimes.  I suspect that cold 40 ounce Old Milwaukees are scarce for him right now.  Life goes on.

Read more…

Short Story by Jamie MacBlues

What's  In A Name? ,by Jamie MacBlues  (with thanks to Uncle John)

I thought I was alone in having the Christian name I was blessed with........

It was a few years back. An old fellow came into the sex shop where I was working, looking to buy the videos "Big Ben Comes Out  The Closet" and "Big Ben Goes Back In Again".

I looked at him closely, decide he was NOT  gonna rob me, and said to him: "My name is 'Ponzfazzle', what's yours. He looked slowly back at me and said " My name's Fred".

Ever since that day, life has continued in the same old tedious way, with few surprises, but hey ho.... :)

The End

Read more…

everyone@strangewaves.ca

Rockton Ontario

Strangewaves.ca  August 21-23, 2015

HELLO EVERYONE.  This is my first post to Cigar Box Nation and I am also just about to finish my first acoustic cigar box guitar.

My son and friends are putting on a concert in Rockton Ontario.  If you are interested please contact using the above email.  I have also posted their website.  This group love all talents and personally I would really like them to experience all of the music, instruments and history that Cigar Box Nation members are all about.  There does not seem to be enough going on in Canada that encourages more involvement with CBG.  I started my interest completely by accident and have been totally blown away by it ever since.  This is the type of excitement that I would like others to find in all of the historic and reborn crafts, music etc.  If you know that you will be in the area, please contact Strangewaves and see if it is something that interests you. They would love to hear from you whether you are an owner, seller or musician, this event has it all.

Thank you for reading my post.  

Read more…

Carroll Is A Guy's Name Too    by John Bolton

Everybody has some weird shit happen to them, but I've had more than my fair share, starting out the day I was born and my folks named me Carroll.  Carroll is a guy's name too.

I live in a piss-ant little town.  We got cheap housing, low taxes and one store, the Kwik Stop.  I was in there one night paying for gas and this guy
with a shaved head walks in wearing a green tee-shirt that said, 'Carol Is
A Guy's Name Too.'

I mean to tell you, I was happy and surprised as shit to see that. Another
guy named Carroll - even if he spelled it different.  But then it hit me, maybe the guys at the county barn were playing some BS joke on me.  That made me a little leery, but I went up and said my name was Carroll with two 2 Rs and 2Ls.  And that I really liked that shirt.

Carol looked surprised, but got over it fast and came back with, "My folks were kinda poor.  They could only afford one L and one R."  

Like  they say in the movies, it was the start of a beautiful friendship. And the start of a great hobby too.  Carol introduced me to making and playing cigar box guitars.   I just wish it could have gone on longer.  Six months later, Carol was dead and gone.  Cancer.  That was the reason for the shaved head.

Carol had bought the old Thompson place before the cancer came back. Bought it cheap as heck because a lot of potential buyers were put off by the fact that Charles Thompson hung himself in the wood shop.  Carol came out from Omaha looking for cheap small town living and a place to build cigar box guitars and amps.

I had just retired from working for the county and was kind of looking for
a hobby.  One that didn't cost a lot.  I did a little wood working and fished a little, but that was pretty much it.

Quick as heck, Carol had me making pretty cool sounds on a cigar box guitar. I loved it.  I never played a musical instrument in my life. At first I thought maybe I found my talent, but it's more like CBGs are just easy to play.  Carol got me playing, singing and building CBGs.  Man, it's like the best hobby there could be.   I like to build shit, I like music and I like to sing.   What's better than putting all that together?

Carol had a wicked good laugh and a great sense of humor.  Just a good, kind, fun and funny person.   One example was the tee shirts.   Besides the Carol shirt there was a 'The Dude Abides' and one in Latin that said,  'I came. I saw.  I want to go home.'  And a bunch more funny ones.

Carol was pissed off and secretive about the cancer, but it was easy to see it was getting worse.   One day I went to Carol's and there was nobody home.  Same thing the next couple days. I started calling Omaha hospitals.  I lucked out on the third call.  The Nebraska Medical Center.   I headed on down there and walked into the room carrying a bouquet made out of Snickers candy bars.   Carol grinned and said, “Hey, buddy!”

Before we could say much more, one of Carol's daughters came in.  I recognized her from a picture in Carol's shop.   The daughter went over and kissed Carol on the forehead and said, “Hi, mom.  I love you babe.”

Mom?   What!?

Carol looked at me and said.   “Ha!  The jig is finally up.”

Well, shit.   I guess the joke was on me.  But there really wasn’t any joke intended.   Carol apologized for not telling me sooner. She'd had her breasts removed with the cancer.  And she had that low voice and laugh.   She didn't realize I thought she was a guy until the second time we got together.  By then, she just wanted to keep things simple and not take a chance on screwing up our friendship. 


I made a friend.  I lost a friend.   I gained a hobby. 

Sad story but some funny stuff too.  I'm still the only guy I know named Carroll.  And that kind of sucks...   Because Carroll is a guy's name too.

Read more…

If you are following along, you know about the trials and sometimes tortures I put myself through performing at the Acoustic Blues Open Mic Nights at Caffe Lena in Saratoga Springs.  To be fair, I judge myself pretty critically in an effort to figure out this live solo performance thing - acoustic no less.  In a lot of respects, I have little business being up on the stage at this point of my musical journey, but that doesn't show much initiative, does it?

Here's a pic of the Acoustic Jam from the June Open Mic.  Great players on the stage and a goofy guy with a weird tool box guitar.

11407304_897898703601070_3617241357421121451_n.jpg?oh=7069d8c82d1b9e0734c13a521e336cba&oe=56155B97

Despite the self-criticism, much of which is earned and well deserved, I have had good nights and great songs up on the iconic stage.  Many of them have come on the weekly Folk Open Mic nights which are open to any format and any music or spoken word.  Performers get two songs and max ten minutes.  The audience is mostly made up of fellow performers and their guests, but some come just to watch too.  Although I have come to feel really welcome at the Acoustic Blues nights, the Folk nights are much more casual and a larger crowd.  I like them when I get a hall pass for the night.

Last night was the third Folk night I attended and performed.  Previously, I've played Uncle John's "Wiener Dog Run", "You Are My Sunshine" a la Jamey Johnson, "So Lonesome I could Cry", Iggy Pop's version of "Louie, Louie", and I murdered the Ramones classic "I Wanna Be Sedated" playing acoustic clawhammer style.  It was fun and I think I did all the songs pretty well.  I've posted videos of most of the songs here.

Yesterday my wife and daughters went to visit family for the weekend and I stayed home to finish up my last three college papers for the semester - which I'm putting off right now by writing this blog. . .  I decided to go out and play two songs with the same title.  "Going Down Slow" by Tom Waits and Howlin' Wolf. I was 8th on stage after performers who had travelled from Mississippi and Oregon.

The Tom Waits version I have just started playing a couple weeks ago and I worked my way through it on the last Blues night.  I had only started playing it the day before.  With a couple more weeks practice, I have this one down much better and I have stuck to playing it with a slide.  The only hiccup in the performance is that I've put some new strings on the guitar which are much lighter gauge and take a delicate touch on the slide.  The highest string is tuned d4 and is an 11 so every once in awhile when playing the IV chord, the slide will hit a little heavy and effectively notes on the 8th fret.  That sounds ugly when I up-pick that single string and it happened once last night.  Otherwise, I think I did well.

The Howlin' Wolf version of the song is forever connected to me and I posted a video of me when I first improvised my own version of the lyrics here a couple years ago.  I finally have this song just how I want it leaves a piece of me on the stage when I play it.  I got a great round of applause and cheers afterward and a lot of compliments as I made my way back to my seat.

I've played somewhere around 20 songs on stage, sitting there all by myself in front of the audience.  It is a little scary every time and it certainly is frustrating when the performance either flops or just doesn't go the way I'd like.  I have practiced with focused intent practically every day since my first performance and sometimes it just hasn't been enough.  But the nights when I get out just one good song make it worth it to me and drive me to keep at it, developing my style and abilities.  Last night charged me up.

I highly recommend getting out there and finding a place where you can play.  Find a place where the audience is interested in seeing you progress, help you through the performances that are not going well, and invite you to come back.

Read more…

Belt Sander Thickness Sander????

I thought I had seen photos on CBN in the last year of someone's awesome homemade setup that mounted a hand-held belt sander as a thickness sander. I cannot find anything in the search results. Any awesome inventors out there? I would love to try it without reinventing the wheel.... or thickness sander.:)
Read more…

Recycling wood.

Reading someone else's post inspired me to do a little recycling.  I had an old sawhorse that I wanted to get rid of.  The wood was so beat up, it was not worth selling.  So, I recycled it.  I am thinking of making a dulcimer and a dog bowl resonator.  We shall see.

Before:9353853659?profile=original

After:9353853693?profile=original

Read more…

Fret-slotting jig

I am using a new fret-slotting jig I built based on a design from http://sixgunguitars.com/fret_slotting_jig.html

It uses a razor blade for a slot locator.  It works great!

I decided to build it after doing my first fretboard for a dulcimer stick.  It was hard to get the slots perfectly straight.  This little jig will be a real time saver.  And the quality of my fretting just went up!

9353852684?profile=original

Read more…

How to fit a non-adjustable 'truss rod'

I thought I would share a technique with you which I picked up from a great builder who is not a member CBN. I think you can argue that a 3 or 4 string CBG doesn't really need any additional neck strength, but I've  found myself making thinner necks recently, and I'd like to make sure they stand the test of time. I am also gearing up to have a go at making a 6 string from scratch so this is a technique I will need to learn sooner or later.

9353849696?profile=original

So, to do this you will need some mild steel bar. I got 3x13mm. A 4 metre length cost me about £4. The postage cost twice that but it was almost worth it to see the look on the delivery driver's face when he handed over a 4m long cardboard tube. You also need a router, and a bit of the correct width and depth for the bar.

9353850659?profile=originalI used the parallel guide on the router to slide along the side of the neck to cut the channel. I used a high speed and 4 shallow passes to get the finished depth (which needs to be a tiny bit deeper that the width of the bar)

9353851053?profile=originalIt fits. Now time to glue it in. I used epoxy with a long curing time. Getting the glue in the channel is quite tricky.

9353851092?profile=originalI held the bar in place with clamps and left it overnight. Make sure you put something between the clamps and the neck so you don't glue them together!

9353851671?profile=originalOnce the epoxy had set I lightly sanded the surface to remove any residue.

9353852084?profile=originalThen just glue on your fretboard as usual and you have (hopefully) a super strong bow-resistant neck that you can shape a bit more aggressively than one without a strengthening rod.

Have fun!

RK

Read more…