I'm relatively new to the whole cbg world. I caught the bug last fall, and this is my sixth build. I worked my way from a simple parts kit supplied with a cigar box, add your own neck, to a paint can lid reso kit, followed by a fretless and two more
After reading an article about the humble pick, the history, various materials used, shapes, etc, and the predicted affect on tone, I decided to use a piano key top I’d found on the ground near the site of a piano demolition many years ago, and give
Without intending to step on any toes, just thought I’d pass along a close substitution for the Blues Blaster LMM GDG nickel wound strings that Gitty has been out of for a while. I waited as long as I could, but when I was plum out of strings, and ha
it happens all the time. You need a screw or six to fasten the lid on the box, or want a screw to go almost but not quite through a piece, and the only ones you have are big honking screws twice as long as required. Try cutting off a screw, often as
I just received a nice scarf jointed maple neck blank, but it has what to me looks like a scary amount of back bow. I laid the factory fret board, confirmed as straight, on edge atop the neck, held firmly near the nut end, as a nice, hard straight e
The Some time ago I saw a video about grounding strings by running a wire to one of the eyelets used as string anchors, and using a metal saddle to get continuity to the remaining strings. It inspired me to ground all three strings at the bottom, wit
Where to start. I’m 62 yes old, never played an instrument other than really basic harmonica many years ago, but I’ve always been interested in building things myself. I’ve built lots of things ranging from buildings and boat
This has probably been covered, but I didn’t find it, so here goes.
When I built my first CBG, using a straight neck, I ran into the issue of the string with the tuner furthest from the nut not having enough drop angle to stay in place on the thread
When our searching for boxes, I found this little jewel for a buck. The liner wood was loose fit, and served as most of the needed pieces to house the baby Gitty amp, and petition off half the box for accessories. Sounds good, and it completely enclo
So I lucked into a reallllllly cool looking solid wood box that I believe is all mahogany, it’s a Camacho Connecticut 6X60 20 count box, with a very cool looking black face with the scorpion logo. It’s just crying for a Humbucker and walnut fretboard
After reading and watching videos about tuning for proper intonation, I wasn’t ready to bite the bullet for a hardtail bridge. I just don’t like the look on a cbg. No other reason. So I bought some 12mm dice, slotted the top of three of them, and use
when I started building the Tin Pan Alley three string, I knew I wanted to put some kind of pickup in it. I had doubts about a disc piezo, and frankly, as a new builder, wasn’t keen to take the dive into messing with a magnetic pickup. So what about
Just finished up my third build, the first with a magnetic pickup, so the first with “electric” GDG strings. I used a bone bridge blank and the “dime above the fretboard” slot depth. As a novice player, I’m surprised how much stiffer the strings seem
Build #2 is nearing completion. Which is to say it’s built and playable in acoustic mode, awaiting electrification. I’m legally blind, with some residual vision, which pretty much rules out anything resembling a quality paint job if I’m doing it. So
So I’m building a CB Gitty paint can guitar kit. I forgot to glue the candle ring hole covers in place, and didn’t realize it until I had the top of the box glued on. Oops! The candle rings have gobs of clearance in the sound holes, sooooo, I wound