Replies to This Discussion

Permalink Reply by BrianQ. on October 29, 2018 at 3:18pm

Picture?

• ▶ Reply

Permalink Reply by Bruce Young on October 29, 2018 at 3:20pm

• ▶ Reply

Permalink Reply by Korrigan on October 29, 2018 at 3:34pm

Very cool Bruce! I was thinking of doing something similar but with the dice standing up in the slot of a wood base so the string goes over the corner of the die.

• ▶ Reply

Permalink Reply by Bruce Young on October 29, 2018 at 3:57pm

That would work with the smaller dice. I don’t recall the exact size, but there is at least one size smaller than the 12mm I used. 

• ▶ Reply

Permalink Reply by Cause the Blue rat on October 29, 2018 at 5:24pm

I've seen someone do this with wood. Each string having it's own piece. Worked great. Like the look of the dice. 

• ▶ Reply

Permalink Reply by Taffy Evans on October 29, 2018 at 6:12pm

Hi, that's serious compensation Bruce, do all strings intonate correctly? I like the look of it though.

Taff

• ▶ Reply

Permalink Reply by Bruce Young on October 30, 2018 at 5:20am

Aye it would be. This is how it ended up. 

• ▶ Reply

Permalink Reply by the anonymous pick on October 29, 2018 at 6:44pm

Don't have a photo of mine , but was similar to this . I used 3 pieces of a ruler with center slot .

• ▶ Reply