The neck is 2" x1" from B&Q there Richard Burbridge range of kiln dried timber and a Walnut fretboard , the box is made from 5mm faced plywood also from B&Q , soundboard is 3 strips of 3mm Spruce glued together and the back is 2 strips of Sapele glued together both materials from Slec , sides of the box is bound with 6mm x 6mm strips of Sapele and the soundboard with 3mm x 3mm strips of the same , bone nut and saddle , rod piezo in the bridge with a strap end pin jack .
Comments
Darned nice piece, Kid! Clean and elegant!
Nice work CK!!!
Well done.
Yes Matt , look at pic # 4 for a better view .
That's a beautiful looking Ukulele you've made. Is the tailpiece two separate components joined 90 deg?
Thanks for the comments
The neck is 2" x1" from B&Q there Richard Burbridge range of kiln dried timber and a Walnut fretboard , the box is made from 5mm faced plywood also from B&Q , soundboard is 3 strips of 3mm Spruce glued together and the back is 2 strips of Sapele glued together both materials from Slec , sides of the box is bound with 6mm x 6mm strips of Sapele and the soundboard with 3mm x 3mm strips of the same , bone nut and saddle , rod piezo in the bridge with a strap end pin jack .
Stunning work my friend! There is nothing not to like about this build! Can you give us a rundown of materials used?
Nice, great job....
Beautiful instrument Capo!