Comments

• 

  Pat Cook February 5, 2011 at 12:23pm

  Hi Steve.

  Sorry to take so long responding. I dont get on-line much.  You are building some beautiful stuff! Do you have any videos playing them?

   To build resonators I buy a set of cones for a tri-cone, and use one each for three guitars. Here is a link to a video of putting together a three string reso I built for Shane,

  https://www.youtube.com/watch?v=J_LBH9ZCCkk

  Check it out if you haven't seen it yet. Of course lots of folks use various stuff for cones, but the real thing really barks.

  Take care, Pat.
• 

  bairfoot cajun January 13, 2011 at 8:55pm

  howdy stevie, i just stopped by to answer your question about the f-holes on the cohiba resonator i built. i have seen them on a build that ju ju did so i asked him if ok for me to use them--he say yep.so i loked at the pic then i copied the pattern on cardboard and adjusted the size of them with pattern work,once i was happy with the cardboard pattern i cut the holes out of the cardboard the located where i wanted them to be on the box--then pencil drew them on the box.after that all i had to do was drill several holes and on the part that has the tail to them i used a coping saw to cut them to shape.hope this process helps you.thanks for your comment.
• 

  Wes "I'm Baaaaack" Yates December 19, 2009 at 10:13am

  Tell me you're middle name is 'Ray' and I'll fall over.
  
  Welcome aboard!
  
  -WY
• 

  Tres Seaver December 18, 2009 at 10:49pm

  Welcome aboard, Stevie! You will find lots of helpful folks and information here on all things CBG (CBB, CBU, etc.) Feel free to poke around, ask questions, and post your stuff (photos, recordings, videos, etc.).
  
  Most of all, have fun!
  
  Tres.