Comments

• 

  Hard luck chuck September 4, 2016 at 6:59pm

  Wow - I was just checking out your wordpress site when my phone buzzed with your 3 or 6 string question. I did pickup a 3 string swamp witch but I mostly play 4 strings that I've built, a 3 string demo would be easy to translate plus I think a lot of the noobs like me CBN would benefit.
  
  Btw I saw your pickup winding video last night, very cool. Building a pickup has been on my list since I fell into this CBG thing.
• 

  Chris Bohlman August 22, 2016 at 10:27am

  Video tip...dern spell check
• 

  Chris Bohlman August 22, 2016 at 10:27am

  Thanks for the Vic too. So nothing special regarding audio? Sounds great, especially if iPhone is all you used!
• 

  Hard luck chuck August 17, 2016 at 3:29pm

  I tried to send this early but might be a repeat (technically challenged)

  Thanks - I would love to see something that would help me understand the hill county stuff better, so far I'm only good at listening to it....  Life's busy and seems to get in the way of my playing/building/learning so no rush.

  As a side note, one of our local PDX bands, Hillstomp, plays a lot of great, gritty music.  Henry is half of the band and I got to see him do a Fred McDowell tune at McMenamins Edgefield a few months ago.  Thought you might enjoy https://youtu.be/lggFIHw-9B4
• 

  Dave Lynas June 6, 2012 at 7:24am

  Thanks Jason, I'm all eyeball...
• 

  Dave Lynas June 5, 2012 at 7:30am

  Wow Jason, an instructional vid of the wireup would be great. Many of us could benefit from it. Thanks a bunch.
• 

  Dave Lynas May 26, 2012 at 11:19pm

  I hand sand with coarse grit (80) until I can't stand it. A lot of the wood I get is pretty well taken down already. I've been getting about 3/16ths Spruce, Maple. Walnut, and Cedar. That I just start with 220 and go down to 400 with this thinned wood. I use these for soundboards except the Maple. It makes a nice back. Often I'll use a thicker wood for the back. I have a lot that is 1/4 inch or a little more for backs. The thick backs work good for electrics. For acoustic I'll stick with thin wood. I'll often start varnishing at 220 grit and keep sanding in between coats with finer and finer sandpaper. This seems to make a nice finish. I don't go for the high gloss or too perfect look. It would just frustrate me. None of my stuff is "perfect". Crude is closer to me.
• 

  Dave Lynas May 25, 2012 at 6:42am

  Hi Jason, I usually use Black Walnut. Rosewood is getting hard to get and Walnut seems to work great. I've been getting guitar backs in Walnut that is too thick to use for a soundboard. It's usually about 3/8" thick and one half a back will make 4 fret boards. I've been using these for diddleys and lap steels. Fretted boards I get from Mike Orr through ebay. He uses Walnut and makes 1 1/2 inch wide fretboards. His work is excellent and cost about 20$ per board. 
• 

  Bluesheart May 9, 2012 at 6:54pm

  Jason, I don't know what the brass thickness was, it was cut from a plate I bought at thrift shop. Maybe 2mm?
• 

  rodney fruits May 6, 2012 at 12:38pm

  Will this help?   I just put the wire between the tail and the box, you could wrap it around a screw too....