Yup Got that, did check all that ,the + - are on the same connection, and walked back in the montage , i asked my oldest ,but he has time on Wednesday, i suspect the change of the mini jack (tree3wires) to the normal (for me i use them in all my builds) mono Jack (two 2wires) and in the setup now i connected one to the Mass( Ground) and i suspect thats false, but i have to bee patience .
Check the polarity of the Speaker & Jack input to verify they’re both wired right? Then go back through your work & slowly confirm your parts placement one by one on the breadboard is correct? The click you hear is the voltage running through the Power switch on the Volume Pot, pretty much all amps do that, the Fender Champ does the same thing, it’s normal?
Hello BrianQ . its a Maker factory ? a german brand never heard of them before , its not what i exspected , ,put it all together it gives a click on the speaker but when i plug in it gives no tone .
still in the proces of finding out how to go about , back to the original setup or ? i changed the speaker around ,original is 8 ohm 4 whatts , my replacement 8 ohm 7 watts, and in stead of a mini jack input i used a normal input jack (mono) here are some pictures:
Comments
Andries, I've not seen any in our liquor stores, but will keep looking. It's definitely awesome and a special re-use for it! Nicely done, my friend!
Hi Gary! the are for sale in the liquor store ! special edition jack Daniels Old no;7 got it from my oldest son on my birthday last januari !
Cool! Wish I could find a mini case like that! Sweeeeet!
Yup Got that, did check all that ,the + - are on the same connection, and walked back in the montage , i asked my oldest ,but he has time on Wednesday, i suspect the change of the mini jack (tree3wires) to the normal (for me i use them in all my builds) mono Jack (two 2wires) and in the setup now i connected one to the Mass( Ground) and i suspect thats false, but i have to bee patience .
Check the polarity of the Speaker & Jack input to verify they’re both wired right? Then go back through your work & slowly confirm your parts placement one by one on the breadboard is correct? The click you hear is the voltage running through the Power switch on the Volume Pot, pretty much all amps do that, the Fender Champ does the same thing, it’s normal?
Hello BrianQ . its a Maker factory ? a german brand never heard of them before , its not what i exspected , ,put it all together it gives a click on the speaker but when i plug in it gives no tone .
still in the proces of finding out how to go about , back to the original setup or ? i changed the speaker around ,original is 8 ohm 4 whatts , my replacement 8 ohm 7 watts, and in stead of a mini jack input i used a normal
input jack (mono) here are some pictures:
That’s bada$$ Andries!! I wish I still had my Silvertone amp in a case guitar! What kind of amp circuit did you use?