The neck is at a pretty good angle, and I was using a domino for a bridge saddle. With all the pressure from the break angle, the domino kept falling over. I had a scrap piece of billet aluminum with threaded holes in it, and some 4-4- screws that fit the threads. So I drilled a couple of holes in the domino, and screwed the metal bar on. The domino is now stable. Probably overkill, but I was just using up found objects.
Comments
Cool gitty, Jerry. Like the toy tailpiece!
Lookin’ good Jerry!
The tailpiece is from a toy guitar
Light is good, Jerry. Looks pretty good too.
The neck is at a pretty good angle, and I was using a domino for a bridge saddle. With all the pressure from the break angle, the domino kept falling over. I had a scrap piece of billet aluminum with threaded holes in it, and some 4-4- screws that fit the threads. So I drilled a couple of holes in the domino, and screwed the metal bar on. The domino is now stable. Probably overkill, but I was just using up found objects.
Off to a good start, what’s the function of the metal bar in front of the bridge?