Posted by Dave Lynas on September 26, 2012 at 6:43pm
A friend gave me some dog bones out of her backyard. Aged and chewed clean. I used my band saw and belt sander to make some nuts, bridges, saddles and a jack plate cover (lower right). Also two little picks.
Read more…
Hi Uncle John, The bone cuts easily. As easy as hardwood. Randy says that a dremel disc saw works on it. I like the band saw. I'm sure a razor saw or exacto saw will do the deed or any hand saw for that matter. If you use a power saw, i suggest a dust mask. The bone has a distinctive odor while cutting.
I get the raw bone from my local butcher ...30lb. case of marrow bones. I have taken some and buried them in the yard, takes over a year to get them clean like that though. My butcher had his bone pit cleaned up recently...i ended up with 8-5 gal. buckets to go through.
Wow Randy, thanks for all the tips. I'll try the lemon oil. My picks are just for picking other stuff than strings. I use bare fingers. I used to flatpick but gave it up for softer sound (complaints of being too loud from the band). I love picks though. They are just cool. Do you get your bone from the backyard? Bretz not...
Those bits i use are dentist bits made in sweden, high quality bits. Their expensive but last a long time and really take the bone away when carving. On raw bone like nuts and saddles i apply lemon oil [ fert board conditioner ] and buff them out.
Hey thanks Randy, you're the Bretz! I'll try the disc. I use a little Dremel buzz saw for my cuts on guit tops and assess holes. Do you finish your bone with anything? You are the master o bone. I enjoyed todays boneworks. But you don't have any competition. I've got enough from two bones to keep me working for a long time. I want to try that little Dremel bit you showed on your recent mic barrels. Looks like a nice tool. I use the little drum sander bits a lot to cut custom pockets for pups, etc. Thanks for the tips. Much appreciated...
Got Bone...lol...great Dave!! you know that a diamond cut-off disc bit for a dremel works great for slicing up bone pieces for nut and saddle making. Plus the surface of the disc can be used for fine sanding the cut nuts and saddles.
Comments
Hi Uncle John, The bone cuts easily. As easy as hardwood. Randy says that a dremel disc saw works on it. I like the band saw. I'm sure a razor saw or exacto saw will do the deed or any hand saw for that matter. If you use a power saw, i suggest a dust mask. The bone has a distinctive odor while cutting.
Very nice guys. How hard is it to cut? JP Swenson gave me a nice bone. Have not touched it. I do not have a band saw.
I get the raw bone from my local butcher ...30lb. case of marrow bones. I have taken some and buried them in the yard, takes over a year to get them clean like that though. My butcher had his bone pit cleaned up recently...i ended up with 8-5 gal. buckets to go through.
Wow Randy, thanks for all the tips. I'll try the lemon oil. My picks are just for picking other stuff than strings. I use bare fingers. I used to flatpick but gave it up for softer sound (complaints of being too loud from the band). I love picks though. They are just cool. Do you get your bone from the backyard? Bretz not...
Bone picks...two types..solid and sliced
Raw slide bottoms and a bag of bone blanks
Those bits i use are dentist bits made in sweden, high quality bits. Their expensive but last a long time and really take the bone away when carving. On raw bone like nuts and saddles i apply lemon oil [ fert board conditioner ] and buff them out.
Hey thanks Randy, you're the Bretz! I'll try the disc. I use a little Dremel buzz saw for my cuts on guit tops and assess holes. Do you finish your bone with anything? You are the master o bone. I enjoyed todays boneworks. But you don't have any competition. I've got enough from two bones to keep me working for a long time. I want to try that little Dremel bit you showed on your recent mic barrels. Looks like a nice tool. I use the little drum sander bits a lot to cut custom pockets for pups, etc. Thanks for the tips. Much appreciated...
Got Bone...lol...great Dave!! you know that a diamond cut-off disc bit for a dremel works great for slicing up bone pieces for nut and saddle making. Plus the surface of the disc can be used for fine sanding the cut nuts and saddles.