The pickup in the middle of the bowl, installed bridge over pickup. I needed to set the bridge back, I am thinking the bridge needs to pickup vibration, instead of moving the pick up, I just added on the top…lazy and……no wire on hand.
Read more…
Thank you, don’t sound bad, learning about intonation, just moving things around, I need a thin string on the end, and add another piezo maybe on the inside, bottom neck area…I removed the spring around the bowl because it rattled to much, keep the spring on the bottom….starting my third one now….that you, later.
Quite elaborate. I did not realize the metal pieces were sound hole covers. Reso builds are kind of difficult builds. I have not had good success placing piezos on the metal of a resonator or license plate. Hope it works out for you.
2nd build and that advanced. Do what suits you, but you might have fun doing a mag pup instead of a piezo.
Comments
I've yet to build a reso, but it's on my horizon! Lots going on with this build!
Thank you, don’t sound bad, learning about intonation, just moving things around, I need a thin string on the end, and add another piezo maybe on the inside, bottom neck area…I removed the spring around the bowl because it rattled to much, keep the spring on the bottom….starting my third one now….that you, later.
Quite elaborate. I did not realize the metal pieces were sound hole covers. Reso builds are kind of difficult builds. I have not had good success placing piezos on the metal of a resonator or license plate. Hope it works out for you.
2nd build and that advanced. Do what suits you, but you might have fun doing a mag pup instead of a piezo.