Comments

• 

  RTZGUITARS September 24, 2013 at 3:41pm

  Hi Toad , in response to your post back in April My amps are Lm386 chip amps. If you have not built one yet try on or Gitty's amp kits. If you want to build one use a smoke amp plan or a Ruby amp plan if you want volume and gain controls. Here is a pic of the inside of my amps.

  http://www.cigarboxnation.com/photo/inside-ha5-walter-reed-project?...
• 

  Jim Junksville Sharkey June 4, 2013 at 4:11am

  Howdy Harley. I designed the nail pickups on the Logjammer a bit different to what your doing. To go down your route with the single poles, I'd remove all the poles from the bobbin then get some slightly longer ones, fit the bobbin under the lid then push the new poles through making sure they come in contact with the magnet. Hope this helps, let us know how you get on.
• 

  colin mcgrath June 3, 2013 at 10:17am

  Hello,

  Yes, I tried it those many months ago. I got the same result as you. Rather diminished sound. I wonder if a larger pot would change things? Anyway, it did not give the satisfaction I wanted.  You could also try Jim Junksville. He did this build:http://www.cigarboxnation.com/photo/the-loggjammer-log-guitar-with-...

  The concept seems there.
• 

  jabes April 24, 2013 at 10:17am

  hi , glad to greet you here on the 'ole cbg loonybin, if i can help just say, I've got over the initial guit building rush after 2 years and 20 builds ....
• 

  Keni Lee Burgess April 16, 2013 at 7:39pm

  Thank you Harley for joining my group. Feel free to add to the discussions or ask questions. Please check out my instructional video CDs:

  http://www.ebay.com/sch/njmikeb/m.html?_nkw=&_armrs=1&_from...

  Let me know if I can be of further assistance. Enjoy your practice, Keni Lee
• 

  Randy S. Bretz April 16, 2013 at 4:59am

  http://handmademusicclubhouse.com/photo/albums/wiring-diagrams-sche...    this might help out