I believe it is Darren Brown that make his piezo pickups so they are in the bridge so far (above soundboard) that they don't actually touch the soundboard(top) of the guitar. I would think this would pick up a more pure string sound. Intersting....
Read more…Hello, new here.
Ok, I just went and bought some cork sheeting, about 1/8" thick, and put a layer of it on my cbg, with little noticeable affect on scrape sensitivity, etc.
I have an acoustic box (top floats freely), cork layer, maple bridge laye
Read more…I hate when I need to solder jack positive(red color cabel) in angle and not straight.
Hard to get right. Smaller cabel breaks easily and thicker cabel bends badly.
I almost made working piezo pickup for my classical guitar. When I was installing th
Read more…Hi guys, really hoping you can help me here.
I've looked but can't find an answer to my problem.
When I wire up a piezo to a volume pot I get a buzz whenever the volume is around half way up,around 4 to 5
but when I turn it up full to 10 the buzzing
Read more…Would like input for installing a single or dual disc style piezo with both volume and tone controls. If I'm using 500 ohm audio taper pots, what value of capicitor should I use on the tone pot? Do disc piezos react to tone controls at all anyway?
Read more…Hi Nation,
I made a fairly sweet sounding cbg with 2 piezo wired in parallel and added a 500k vol pot, works great no noise whatsoever if i have the vol pot turned all the way to the max, but when i back it down to say half way, it starts to have f
Read more…