We wanna know who you are! Where ya from? What'cha buildin'? This is a place for new members to introduce themselves and old 'uns to show 'em around. I'm Shane & I run the Nation. I'm glad you're here. Come on in and tune up!

1373 Members

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments are closed.

Comments

    • BrianQ. > Ducati Scotty September 26, 2024 at 12:06am
      Unless you get rich!!!
  • Eric Schaller September 11, 2024 at 1:32pm
    My name is Eric, I am from California north of SF not necessarily a hotbed of 3 strings. I have been building for 4 years, made about 50. Started out with scrape from work, move to scrape from lumber yards, now I get wood from a luthier his scrap. Today most of mine are all hardwood, love the contrast and the sound.I love to play them they are all different sizes and styles. I have moved back to cigar boxes for a change, there is a learning curve for every build, but I love the wood and the challenge. My playing is a work in progress, wish I could play better to high light my guitars. It is the journey, down the rabbit hole.
  • BrianQ. June 28, 2024 at 2:02pm
    AJ, you can find build/play info over in the Resources tab of the page?
  • WhyDoYouNeedToKnowMyName June 28, 2024 at 1:56pm
    Hi all,

    Good to join CB Nation!

    I'm AJ. Living in Alberta, Canada. I'm an absolute beginner who joined CB Nation as I look to build my first project. I'm thinking of building a 4-string CBG or a banjo — but we'll see what I manage! Hoping to use this as an opportunity to also get back into playing music, as I've not played in many years. If you have any advice for somebody who's just starting out, and/or advice for somebody who's looking to use their first build to learn to play some Son House-like blues or Devil Make's Three bluegrass after years of amateurish, grunge-y bass playing, let me know!
  • Michael Starnes June 23, 2024 at 11:33pm
    Hello All I'm Michael Starnes and i'm new to building Cigar Box guitars, I live in Rogersville Tennessee, and I have built 4 Cigar box Guitars so far, So glad I found The CIGAR BOX NATION, I do have a question if someone could answer it for me I would appreciate it, I am currently working on a CBG and i'm trying to wire two Gitty Bucker surface mount pickups, one at bridge and one at the neck position with 1 tone pot and 1 volume pot with a 3 way switch if someone could point me in the right direction on how to wire all this you would be a lifesaver. Thank You and Glad to be apart of the Cigar Box Nation.
    • BrianQ. > Michael Starnes June 24, 2024 at 12:19am
      https://guitarelectronics.com/
      https://www.seymourduncan.com/resources/pickup/wiring-diagrams
      Guitar Electronics Parts & Wiring Diagrams | GuitarElectronics.com
      Huge selection of top brand guitar & bass electronics, pickups, parts & hardware. Plus hundreds of free guitar wiring diagrams.
    • BrianQ. > Michael Starnes June 23, 2024 at 11:58pm
      The site has a “Search” box at the very top of the page, it yields plenty of cbg knowledge if asked? I would try that first, or just simply go to Seymour Duncan or Guitar Electronics website ?
  • Nate Harvey May 27, 2024 at 11:20am
    Hi!

    Nathan Harvey from Eastern PA here. I've seen Reverend Payton perform twice at a Folkfest right against my property and have seen one vendor selling cbgs, but didn't really discover this world until fall when I got interested in Seasick Steve and did a few searches on his gear. I ended up asking for both of Speal's books for Christmas, have built 3 cbgs (slide only, fretless, 2 w/ piezo and pre-amp, 1 acoustic w/ reso) since.

    I'm building some more elaborate ones now with frets, resos, deltabuckers now, want to try mutant guitars next, am hoping to find a lot of guidance.


    Anyway, glad to be on board.

    Nate
  • BrianQ. May 21, 2024 at 12:04am
    Welcome, check out the Resources tab for build/play info and join some groups located in the Posts tab? 😁
This reply was deleted.

Forum

Better late than never...

After joining this forum in 2014, I finally have my 1st CBG which my wife bought for me at the weekend (a 4 string from Frethound Custom Guitars).  I was never going to get around to building one. Now to learn to use a slide.WhatsApp Image 2024-04-14 at 16.53.40.jpeg

Read more…
Started by Crazed Fandango
0 Replies

My 1st CGB

Just finished my 1st freeless acoustic CBG, based on the #Glenn Watt design. 31inch neck, 25inch scale, 42/32/24 gauge strings. Sycamore neck and a 200mm x 180mm x 45mm box made from 7mm ply. Neck finished with Osmo oil wax with fret marked on using pyrograph. 2 x 12mm sound holes. As you might notice it's a corrie-fisted one (left handed to those non-Scots!) Got it tuned now, just got to learn how to play it!!IMG_20240116_153022.jpg

Read more…
Started by Mi Rankin
2 Replies

Hi, y'all.

Hi, I'm HazelFyrebird, and I'm a wannabe luthier (I feel like I'm standing up at a Builder's Anonymous meeting...) in Virginia.  I'm a bit of a lurker, as I've been reading and reading for a while, and this is my first post.  I'm a musical social butterfly: in addition to being a lifelong singer, I seem to collect instruments and play some, pretend to learn others, and "just gaze at the pretties" for still others.  I want to get back into playing fiddle, and money's tight, so here I am.  I plan…

Read more…
Started by HazelFyrebird
1 Reply

I Am Blaming All of You with YouTube Channels.

This is not so much of a reintroduction as a rebirth so to speak. I joined Cigar Box Nation many, many years ago when I initially developed an interest in more "primitive" instruments, CBGs, mountain dulcimers, diddly bows, canjos and "strumstick" type instruments. I am primarily a bass player but stringed instruments of all types hold a fascination for me. And then the injury happened. I sustained nerve damage in my left arm that would no longer allow me to fret anything. my had was useless. I…

Read more…
Started by William Bannier
3 Replies

Photos