Videos

Shaping a 3 string Cigar Box Guitar neck with hand tools

Posted by Richey Kay on September 14, 2015 at 6:21am

171

Get Embed Code

<iframe width="480" height="270" src="https://www.youtube.com/embed/0htcvV1SOX0?feature=oembed&amp;wmode=opaque" frameborder="0"></iframe>

"shaping neck", CBG, "hand tools", rasp, neck

My technique for shaping a 3 string CBG neck.Tools used were rasps (14 & 28tpi), spokeshave, cross cut file, half round file and 60 grit fabric backed sandpaper.This is at double speed. I hope someone gets some use out of it!Music courtesy of Devin Townsend; 'Canada' & 'Down and Under' from Terria (2001)

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

Gary W aka Rev. Bluejeans September 18, 2015 at 11:21am

You just gotta love a spokeshave with that kind of history! Excellent, my friend!
Richey Kay September 18, 2015 at 3:11am

Cheers Maddog! That made me giggle RTZ. Not a brand name spokeshave. It was made by my great great grandfather and given to me by my grandpa. It holds an edge extremely well.
RTZGUITARS September 18, 2015 at 1:20am

I think you need to lay off the caffeine Richey. What brand spokeshave is That?
Maddog September 17, 2015 at 2:01pm

Nicely done Richey! The labor of love ;-)
Richey Kay September 17, 2015 at 1:22am

Thanks Gary and John! I still need to look at one of those four in hand rasps, they sound interesting. It would take something really special to convert me from my Continentals though! For me this is one of the most fun parts of a build, thanks for watching!
Gary W aka Rev. Bluejeans September 16, 2015 at 5:29pm

Richey - great video! I'm more like Uncle John - breaking the edges more so than going full round on the neck. Gotta admit, that the edge breaking varies from gitty to gitty, depending on how much rasping I feel like doing! Well done - and thanks for playing it at double speed, so I feel even more like a slacker! ;-)
Uncle John September 15, 2015 at 7:25pm

Good one, Richie.

I don't try to get quite as nicely round as you do, but lately I have set aside the router and used a four in hand rasp -the less course round side- and end up with fairly quick and smooth necks.
Richey Kay September 15, 2015 at 2:45am

Thanks guys. I realised that I spend a lot of time explain how to do these things, but showing is usually better. Jim - believe it or not I have shaped 8 necks with that spokeshave since the last time I sharpened it. It was made by my great great grandfather, they must have had very good quality steel back then!
Clock The Wolf September 14, 2015 at 11:24pm

Always good to see someone put something like this up.
Nancy kat September 14, 2015 at 1:04pm

Wow u work fast lol love that music!!! Your skills r stellar Richie~K! Meowwwww^..^