Photos

Step 7 - Drill out the holes for the tuners as accurately as possible.

Posted by Rand Moore on October 13, 2012 at 12:21pm
You should come up thru the sizes of drill bits when cutting the three holes for the tuner shaft. Then for the mounting screw holes you will want to use your smallest drill bit. But first ascertain that the drill is small enough by holding it up to a mounting screw, The drill bit should be the same diameter as the shaft of the screw NOT including the threads,
Read more…
Previous
Next
Tags: Build, Headstock, Slotted, headstock, photos, slotted
E-mail me when people leave their comments –
Follow

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

  • Rand Moore October 14, 2012 at 10:15pm

    Thanks, Dave.

    These photos are from a build I did 2 years ago and my designs and techniques have improved, but since these photos give you the basic idea, I thought they'd be useful to some builders who don't have a machine shop at their disposal.

    -Rand.

  • Dave Lynas October 14, 2012 at 9:15pm

    Thanks for the tips and step by steps on this build. Very appreciated and beautiful work.

This reply was deleted.