Photos

Nut IDEA

Posted by Uncle John on January 3, 2016 at 5:04pm
Not me. The guitar nuts.Many of us have used slotted screws for the nut on a didley bow. They are easy. The Action is then adjustable and they also work as a string guide to hold the string in place.IDEA: Why not use slotted screws for the nuts on fretless 2, 3 and four strings?
Read more…
Previous
Next
Tags: Unc
E-mail me when people leave their comments –
Follow

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

  • Uncle John January 4, 2016 at 9:59am

    Ha!   Thanks Guys   Good point, Pick.  Should be okay for a 2 string - but would need small screws for a 3 string or it might weaken the wood too much.

  • Maddog January 4, 2016 at 9:21am

    nutty-professor-1-772517.jpg

  • the anonymous pick January 4, 2016 at 7:13am

    just a shot in the dark  here , but  it is possible that some folks may fear  the process  of screwing 3 screws   along the same  line in a 1 inch thick  board  may weaken  it  and invite cracks under pressure  .  not to mention  possible inconsistency   in  height  once  each screw  slot  is   lined  up  with the string direction  . a full  half turn  can be alot depending on thread . and then again , one screw  or bolt sideways does the job. on diddlys  (especially  on  pole  necks ) , you  don't  have that instant option .  a single screw  seems logical.

  • Jock MacHinery January 4, 2016 at 6:54am

    I built a 2 string chugger with screws for the nut but have now changed to a mahogany wood one. Nothing wrong with the screws - just my poor construction!

    All my canjos have used screws tho.

  • Dave Lynas January 3, 2016 at 8:56pm
    Great uncle. Works for a bridge too.
  • Dave Lynas January 3, 2016 at 8:55pm
    Go Uncle! Screw your nuts then... :*)
  • the anonymous pick January 3, 2016 at 6:55pm

    ;-)

  • Uncle John January 3, 2016 at 5:44pm

    Somebody just posted a photo of doing it on a 2 string.   Sure seem like a good idea.

  • AGP # January 3, 2016 at 5:33pm

    Had thought about using screws for the nut(s) on a 3 string in the past, but don't think I ever got around to doing it???

This reply was deleted.