First Act M104 Mod 1

Here's an easy mod I did on my First Act M104 amplifier. I installed two 9-volt battery clips from Radio Shack, using existing screws. Didn't even have to drill anything. A good battery goes in one clip and powers the amp, and a spare battery goes in the other clip. The amp's specs call for 14 volts, but mine runs fine on 9 volts.
Read more…
E-mail me when people leave their comments –

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

  • Hi Gene, I thought I replied to this but must have failed somehow. I don't know how long the battery will last as I haven't played it enough to find out. It's plenty loud for a practice amp in the music room or basement workshop. One thing I do with it is use it as a signal tracer during troubleshooting and it really works well for that. Sorry for the delay in getting back to you.

  • Hey Mike, how long does it run on that 9v? Any volume issues?

    Thanks!

  • Good deal, Hal.  These are really decent amps for the money.  I bought a Cohiba cigar box last fall and built a guitar out of it.  I took it and this amp back to the flea market where I got the Cohiba box and played it for the guy who sold me the box.  It drew a decent sized crowd before I got finished up,  Let me know how yours works.  See Ya!
  • Excellent idea!  I have two of these amps and am going  to try this!
  • Hi Uncle John - I'd almost bet that 18 v would work.  There was another amp like this one at the thrift store the other day.  It didn't have a power supply and I bought it for ten bucks. I might try two batteries on it one day just to see what happens. See ya!
  • Good idea, Mike.  I wonder what to batteries (18V) would do.  Louder or blow the it up?
This reply was deleted.