Yes, at last summer's Bliss Fest, I had the chance to meet "Hymn for Her" in person, at which time I noticed her CBG had used the 2 out-up jacks. After hearing about the new "Gitty Wickedbuckers". Upon the advice of Louie Lammana, I used a gitty pre-wired 6 string single coil harness, cut off the single coil and spliced in the Gittybucker to the harness. I decided to add one to my Cor-19 build over and above the Paintcan lid reso via a flat piezo in the saddle below the brass threaded bolt bridge, then to a uke pre-amp to it's own outlet jack. I hope this answers your questions. The reso sound side is quite different than the Gittybucker sound side. I do have the option of going to 2 different amps at the same time with 2 different sounds.
Comments
I almost forgot the most important part to me is the acoustic sound, which is intact too.
Yes, at last summer's Bliss Fest, I had the chance to meet "Hymn for Her" in person, at which time I noticed her CBG had used the 2 out-up jacks. After hearing about the new "Gitty Wickedbuckers". Upon the advice of Louie Lammana, I used a gitty pre-wired 6 string single coil harness, cut off the single coil and spliced in the Gittybucker to the harness. I decided to add one to my Cor-19 build over and above the Paintcan lid reso via a flat piezo in the saddle below the brass threaded bolt bridge, then to a uke pre-amp to it's own outlet jack. I hope this answers your questions. The reso sound side is quite different than the Gittybucker sound side. I do have the option of going to 2 different amps at the same time with 2 different sounds.
Yea, why is there to inputs, just curious?