AGP #387 - ''Lamb Roast''

AGP #387 - “Lamb Roast”3 String Roasting Pan GuitarScale : 685.8mm / 27 inchesStrings : .052NW / .036NW / .026NW /Tuning: D / A / d /The Roasting Pan was discarded by the boss of the house a couple of years ago, and has been sitting under the work bench ever since, a recent similar build posted by Miku, prompted me to do something with it, it’s the 3rd Roasting Pan Build I’ve done, and is a little larger than the other 2, was going to leave the Pan ‘au naturel’, but after wiping off some sharpie marks with Acetone the unknown coating started to come off, so I kept going!, so it’s a bit of a mixture of Rustic and Shiny, the Neck is an unknown hardwood, the emphasis being on “bloody hard”, which is evident by the burnt saw marks, it did get a little touch up with 80 grit sandpaper, to take the sharp edges and splinters off, and then applied a couple of coats of 50/50 Mineral Turps and Linseed Oil, the Bridge and Tailpiece were made from Plumbers Copper Tubing, and an 11.9k Open Humbucker is wired through a Tone Pot to the Output Jack.:-)
Read more…
E-mail me when people leave their comments –

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

  • "Thanks Bob", at $25 for materials, it's a Cheapie, but a Goodie  :-)

  • "Lol Pick", Ooh Eeh Ooh Ah Aah Ting Tan lamma lamma ting tong   :-D

  • Utterly "Pan"tastic! AGP. A shining example of your skills. Great use of materials.

  • lamma lamma ting tong ;-)

  • "Thanks UJ", in years gone by, the Sunday Laaaaaaaaaaaaaamb Roast used to be a tradition in a lot of Australian households, but not so much these days!, :-) 

  • Not baaaaaaaaaaaaaaad! You sure did a good job on the sound holes and back and the fingerboard sure has a nice look. It makes my tail wag.
This reply was deleted.