As you can see in the last Pic here, I originally Hot Glued a Gitty Flat Bucker to the Neck, which I think cooked it, and wouldn't work anymore, has anyone else had this same problem ???? :-{
Read more…
Check for a broken wire, overheating softens their temper & makes them brittle? If solder doesn’t flow within a 5 seconds: 1.you either need flux 2.wire or iron tip has contaminants or coating 3. or you’re iron temp is too low. Something that I’ve found with Flatpup’s is the closer to the strings the better, especially when you’re ghosting them? Good luck figuring out what happened :)
Comments
"Thanks BQ", It's in the too hard basket at the moment, and will look further into it a bit later on ;-{
Check for a broken wire, overheating softens their temper & makes them brittle? If solder doesn’t flow within a 5 seconds: 1.you either need flux 2.wire or iron tip has contaminants or coating 3. or you’re iron temp is too low. Something that I’ve found with Flatpup’s is the closer to the strings the better, especially when you’re ghosting them? Good luck figuring out what happened :)