Posting a video is harder than the actual finishing process.
Tear craft paper into pieces, no cut edges.
Crumple up your pieces. The tighter you wad them, the more "grain" you will have once it is finished.
Mix the glue and water about 50/50 to thin it down.
Coat both sides of the paper with the glue mixture to saturation.
Apply to box and smooth out all of the air bubbles and wrinkles.
Spray with 2-3 coats of polyurethane.
Comments
Tear craft paper into pieces, no cut edges.
Crumple up your pieces. The tighter you wad them, the more "grain" you will have once it is finished.
Mix the glue and water about 50/50 to thin it down.
Coat both sides of the paper with the glue mixture to saturation.
Apply to box and smooth out all of the air bubbles and wrinkles.
Spray with 2-3 coats of polyurethane.
Its so easy, a caveman could do it..... ;-)
Gorgeous
Did the box come like that or did you put a finish on it?