Replies

  • Sweet ! I am in the middle of my first build, been a challenge so far but with the help of folks on the blog I fixed everything I screwed up and made a promise to myself to measure twice, think, and cut once. today has been a good building day...P
    Michael Cuell said:
    I cut a small diagonal piece from the end of the headstock, turned it around and glued the flat edges together. I made sure that it was aligned well with the both the slope of the cut and the two faces. I clamped it and allowed the joint to dry overnight. I then cleaned it up with a small plane and sand paper.
  • I cut a small diagonal piece from the end of the headstock, turned it around and glued the flat edges together. I made sure that it was aligned well with the both the slope of the cut and the two faces. I clamped it and allowed the joint to dry overnight. I then cleaned it up with a small plane and sand paper.
  • love the way the strings line up on the head. was the head added or part of a one piece neck. I am on my first build and gathering my supplies now...P
  • Very nice first build! Please consider joining my discussion group:

    How To Play Bottleneck Slide CBG with your host Keni Lee Burgess

    http://www.cigarboxnation.com/group/howtoplaycbg

    Feel free to write if you have any questions.

    You might find my instructional CD #5 helpful with your 4 string study.

     http://www.ebay.com/sch/njmikeb/m.html?_nkw=&_armrs=1&_from...

    Enjoy your practice, Keni Lee

     

  • Very nice-and you Fretted the very first model! You're a braver soul than I was with my prototype...
  • Michael,

     

    Nice! I like the Sharkfin headstock.

  • Looks GREAT! Let's HEAR it!
  • Good job, I like the headstock.
  • Pretty nice !

  • Nice!!!
This reply was deleted.