OK, first what are your thoughts on stringing CBGs with the strings 6,4,2 and then 5,3,1 on a different CBG? Do you prefer the neck of the CBG to be just sanded wood and unfinished or coated with a lacquer or some other coating?
You need to be a member of Cigar Box Nation to add comments!
I am stuck on using the 234 strings,
The downside is that it costs me a set of strings per CBG
I just tried splitting a pack with two guitars but it didn't sound right to me
I got a good deal on some Minwax Puritan Pine that was on the clearance rack at HD
It is so light that is barely noticeable over oil on an oak neck
Best part is that it was $1.50 a can and I still have 3 cans left and two of Providential Pine, that is a lot darker
the downside is that it always has a slightly oily feel to it, but no one has complained
Form usually always follows function. What do you want the instrument to be able to do? What is your reason for wanting to use strings 6,4,2 (tuned?...E,D,b?...an E7th no 3rd?). Of course there are no rules, but you have to live with the consequence of your actions. LOL Although...it is good to experiment and proceed blindly sometimes. Enjoy the adventure.
The first rule of thumb to know about when it comes to building a CBG is that there are no rules. With that being said, it is just personal prference as to wich strings you use. 6 4 2 & 5 3 1 will certainly work. As will 6 5 4 & 3 2 1, point being, its entirely up to you.
The first 2 CBG I built I gave to my boys. Those I didnt bother clear coating, just stained. They are going to beat those necks up, so I didnt waste my time. Most everyone here will suggest you finish the neck to protect the wood from atmospheric conditions to keep the neck from warping and twisting and to protect it from discoloration from the natuaral oils in your palms and fingers. Some finish thier necks with spray on MinWax type clear coats in a spray can. Others go all out and use lacquer. And then there are those like Josh from Smokehouse Guitars who prefer shellac and rub on finishes like Tung Oil. So here again...its up to you...there are no rules!
For the strings I hve used 654 on one guitar and 321 on the other, then I've broke some and mixed it up with good results so give it a try. I use tung oil on my necks, I tried a spar varnish and it looks nice but my hand does not slide well on it.
Replies
The downside is that it costs me a set of strings per CBG
I just tried splitting a pack with two guitars but it didn't sound right to me
I got a good deal on some Minwax Puritan Pine that was on the clearance rack at HD
It is so light that is barely noticeable over oil on an oak neck
Best part is that it was $1.50 a can and I still have 3 cans left and two of Providential Pine, that is a lot darker
the downside is that it always has a slightly oily feel to it, but no one has complained
I'm not normally a nit-picker, but I think that's just short for "there are less rules than you'd think".
At least until I see more successful CBGs with fishing line, 8ga wiring, rubber bands, coat hangers, hemp rope, nylon rope, coated wire cable or yarn.
The first 2 CBG I built I gave to my boys. Those I didnt bother clear coating, just stained. They are going to beat those necks up, so I didnt waste my time. Most everyone here will suggest you finish the neck to protect the wood from atmospheric conditions to keep the neck from warping and twisting and to protect it from discoloration from the natuaral oils in your palms and fingers. Some finish thier necks with spray on MinWax type clear coats in a spray can. Others go all out and use lacquer. And then there are those like Josh from Smokehouse Guitars who prefer shellac and rub on finishes like Tung Oil. So here again...its up to you...there are no rules!