Photos

Comments

• 

  onesixtwocbgs May 25, 2014 at 3:18pm

  Thanks Michael! Plate is mounted directly to top of body on this one. I've seen others recess plate into body though
• 

  Michael E White May 25, 2014 at 9:07am

  Nice build.got a ? Did or can you cut the lid where the plate goes.Or did you just attach the plate?
• 

  onesixtwocbgs May 22, 2014 at 10:52am

  Mine will mount from the top as well. I am going to try a hand nibbler to cut the holes
• 

  Richey Kay May 22, 2014 at 10:20am

  Could I ask how you cut the plate for the pups? My options are dremel or snips... my pups mount from the top so the hole doesn't need to be perfect!
• 

  Richey Kay May 22, 2014 at 3:39am

  and typing at the same time? Impressive!
• 

  onesixtwocbgs May 22, 2014 at 3:07am

  The sides of the box are about 5/8" thick with 1/4" blocks glued to where the plate mounts. Crazy, I am also winding pickups for 2 more license plate builds!
• 

  Richey Kay May 22, 2014 at 3:00am

  No worries, that's cool. I assume you've got some blocks under the mounting screws?

  In my case it's pretty much moot now as I've just finished winding a pickup for it :)
• 

  onesixtwocbgs May 22, 2014 at 2:51am

  Sorry Richey, I don't but I can tell you that it basically just the plate mounted on the box. It is not a neck thru- the tail is attached to the end of the box and the neck extends only about an inch and a half inside.
• 

  Richey Kay May 22, 2014 at 2:41am

  Interesting. Got any mid-construction pics? Inside the box for example?
• 

  onesixtwocbgs May 22, 2014 at 1:50am

  Thanks Richey! This one is easily the loudest and most crisp sounding acoustic build to date, not sure why but it booms!