Ben "C. B. Gitty" Baker
  • Male
  • Rochester, NH
  • United States
Online Now
Share

Ben "C. B. Gitty" Baker's Friends

  • Peter Lake
  • Joe Nanzer
  • John Matrishon
  • jimmy circle
  • Chris Bohlman
  • Sean R. Thornton
  • Dewayne Clark
  • Michael barron
  • Joseph Hammonds
  • Rusty Summer
  • Eric Denton
  • Derek Rose
  • Alan Steeg
  • Janis Wilson Hughes
  • Brian Ross

Music

Loading…

Ben "C. B. Gitty" Baker's Discussions

 

Cigar Box Guitars are my Full Time Job

What started off as a hobby has grown into my life's work...

Hi, I'm Ben "C. B. Gitty" Baker, and I am the proud owner of Cigar Box Nation and C. B. Gitty Crafter Supply, the premier supplier of parts, kits and gear to the cigar box guitar and handmade music movement.

I first got into handmade musical instruments back in 2008 when a friend brought me a canjo as a gift from Gatlinburg, Tennessee. I looked at it, plucked a few notes, and said "well heck I can build one of these." I got on the internet, discovered cigar box guitars, and was soon hooked. Not long after, Shane Speal (the King of the Cigar Box Guitar) founded Cigar Box Nation, and I joined a couple of weeks later.

After building a few, I realized that I could maybe sell some fret wire on eBay to help fund my hobby. From that small start I began sourcing and selling more key parts for CBGs - tuners, grommets for sound hole inserts, box corners, tailpieces, etc, and within a couple of years the business had grown so much that I was able to quit my day job and run C. B. Gitty Crafter Supply full time from the basement of my home. A year or so later, Shane Speal sold Cigar Box Nation to me so that he could focus his energies on his music career, and I have been running it ever since.

Now, C. B. Gitty is housed in 13,000 square foot section of an old mill in Gonic, New Hampshire and has eight employees, with over a thousand products and shipping over 500 orders a week. Even with all of this growth, I remain as excited as ever about cigar box guitars and the handmade music movement... I still get that excitement and thrill when I finish a guitar, and I can't wait to get it strung up and see how it sounds.

This movement is just getting started, and I can't wait to see where it goes. For more of my thoughts on all of this, check out the Cigar Box Guitar Manifesto which I wrote a while back, which really sums up my feelings about it.


Ben "C. B. Gitty" Baker

Ben "C. B. Gitty" Baker's Photos

  • Add Photos
  • View All

Latest Activity

Joe Caruso commented on Ben "C. B. Gitty" Baker's video
Thumbnail

Cigar Box Nation TV (6/1/16) - Mini Humbucker Installation in the Mi Amor

"Oh you saved me bacon and a few hours of time. I found the installation plans on cigarboxguitar.com. - thank you!"
Thursday
Becky Chaffee liked Ben "C. B. Gitty" Baker's page How to Play the Cigar Box Guitar - Free Lessons!
Monday
Ben "C. B. Gitty" Baker commented on Poorness Studios's blog post Building My First CB Gitty Kit
"Good work, glad you liked the kit. We have more great kits in the works for 2019, stay tuned!"
Jan 15
Ben "C. B. Gitty" Baker liked Poorness Studios's blog post Building My First CB Gitty Kit
Jan 15
Ben "C. B. Gitty" Baker replied to ILL GREEN's discussion Wiring CB Gitty Black Ice Single Coil in the group CBG wiring & electronics.
"Thomas is correct. Red = positive, white/bare = negative/ground."
Jan 9
ILL GREEN joined Ben "C. B. Gitty" Baker's group
Thumbnail

C. B. Gitty Crafter Supply

C. B. Gitty Crafter Supply is your one-stop shop for the parts and accessories you need for building and playing Cigar Box Guitars and other hand-made instruments (and even store-bought ones!). This group is the place for product links and updates.
Dec 27, 2018
rodger moore commented on Ben "C. B. Gitty" Baker's group C. B. Gitty Crafter Supply
"We got our order yesterday just in time for Christmas. It included the two speaker CBG amp, which is just beautiful. Thanks you CB Gitty, and Merry Christmas!!!"
Dec 25, 2018
Thomas "Duck" Petry commented on Ben "C. B. Gitty" Baker's group C. B. Gitty Crafter Supply
"What BrianQ said."
Dec 24, 2018
BrianQ. commented on Ben "C. B. Gitty" Baker's group C. B. Gitty Crafter Supply
"Merry Xmas guys n gals of cbgitty, I appreciate what you’re doing for the cigar box community, keep up the good work!!!"
Dec 24, 2018
Kent K Barnes liked Ben "C. B. Gitty" Baker's discussion Searching for Eddie "One String" Jones - MUSIC AND PICS
Dec 20, 2018
Dave Lynas commented on Ben "C. B. Gitty" Baker's photo
Thumbnail

Printed Camacho Box

"Thanks Ben for getting our Pictures glitch worked out."
Dec 19, 2018
Dave Lynas commented on Ben "C. B. Gitty" Baker's photo
Thumbnail

Printed Camacho Box

"Hey Ben. Looks great. I’ll be trying one of the big box prints soon. I love the two prints you made for me so far. Looks like our pictures problem is solved?"
Dec 19, 2018

Profile Information

How did you learn about Cigar Box Nation?
Web search way back in Jan 2009

Ben "C. B. Gitty" Baker's Videos

  • Add Videos
  • View All

C. B. Gitty's Etsy Shop

Loading… Loading feed

Comment Wall (101 comments)

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

At 12:39am on August 17, 2018, BrianQ. said…

Thanx for $5 Friday, great idea!

At 10:14am on May 28, 2018, Silent Jim said…

Hey Mr. Ben I'm impressed by the social media hobby group/crafter's supply model you have working here. I think it's the key to your expansion and to your company's financial sustainability. Seems to me increasing sales and product lines would start with Facebook accounts generating social connections with different hobbies that determine and promote supplies specific to different hobbies. Whether held in inventory or provided through drop-ship contracts new product lines should be a matter of cherry picking product for highest return. You could even incentivize employees to manage these 'micro hobby group Facebook accounts' for a comission of sales generated. Lots of different crafts and hobbies out there need supply, so the potential for growth is good.

Just some thoughts from a well-wisher... Love 'The Gity Gang Show' btw. Much better than the 'Ben and Shane Show' someone suggested a few years ago. XD

At 6:48am on January 29, 2017, Moritz Voegeli said…
Ben hey, I had a workshop with newbies in cbg matters, and we checked different methods of slotting a fretboard: just with a knifelike japanese saw with a narrow blade, with your guitar fretting starter kit, and with Chickenbone John's fret slotting tools.
 
Your guitar fretting starter kit I had to modify in two points: the mitre box is too narrow for metric cut timber, 1.5" is somewhat less than our 40mm or 1.575": I had to replace it with my own; why not a 2" mitre box usable for larger four or six stringer fretboards too?
 
Typical mistake of my newbies: the cut for the fret is not level but higher in the mid of the board, so hammering in the mid loosens the ends of the frets; adding a feeler to check the cut is deep enough and level would greatly improve the value of this valuable package, at the cost of some cents.
 
Have a good time, Moritz
 
At 6:32pm on January 11, 2017, Ethen Baker said…

Happy day o' Birth. Thanks for all you did and do with Shane. You guys make it better for us try-it-yourselfer's. I get excited to see new emails and broadcasts from ya'll. Many more years of love.

Ethen Baker

At 3:58pm on January 10, 2017, Paul Craig said…

Happy B-Day Young-in'.

At 1:22pm on January 10, 2017, Rick Gaudreau said…

Happy birth, Ben, and thanks for all the work you do for CBGs and those who love them.

At 12:13pm on January 10, 2017, John said…
Happy Birthday Ben wish you another 40 years!!!
At 2:17pm on July 13, 2016, J.Rob said…

I'm with ya Jim on that those cats rock!
Now i can see a Gitty WV location with Your master skills at the helm!!!!!

Hmmmmmm!

At 9:39pm on July 12, 2016, Jim Morris said…

Thanks much for the friend request Ben. I had been making instruments for a few years before discovering CB Nation but thanks to you and the many helpful members here I was able to do things I'd never imagined before. You and Shane provide a wealth of information, not to mention a good place to buy parts! Hope to see you in York!

At 7:26pm on August 31, 2015, Spence's Rye said…

Thx for your comment on the instructional vid flier!

At 9:34pm on July 10, 2015, rick washbrook said…

Ben, 

How amazing can that be you started this as a hobby and now it is your work and employment.

I like the looks of boxes you make. Some are very unique.   I want you to hear one of my slide guitar originals. Perhaps I will buy one from you instead of making one, and get one that works well and benefit from your mistakes.

Rick Washbrook ' Whisky Drinkin' Woman ' Original '

https://www.youtube.com/watch?v=e3ZeXvGQQsc

 I hope that you enjoy it. You have inspired me.

Cheers

Rick Washbrook

Please write me back. I am a member of Cigar box but have not posted anything yet. I am new

my e mail is rick@washbrookmuisc.com

At 12:06pm on February 3, 2015, Andries D. EKER said…

Thats OKE Ben ,are there more CBN regulations for Nation site users? Don't like to effend the Famely folks! Greeettssszzz.

At 10:20pm on January 15, 2015, gary herget said…

Hey Ben, got a message to check out shane's latest news letter but the blogs are gone. Have looked twice still not there have they been moved if so where, just trying to keep up.

Thanks, Gary

At 2:14am on January 10, 2015, bairfoot cajun said…

howdy mr gitty,i just stopped by to say happy birthday,hope your day is great as it can be.

At 5:54pm on November 7, 2014, Bill Baker said…

Can't change my photo on my page Ben.  Keep getting error message after trying different pics both jpg and gif.

Bill Baker

At 6:17am on November 2, 2014, Michael Fred Johnson said…

Thanks for featuring my latest guitar in the newsletter and for your kind comments

At 7:58am on October 17, 2014, Uncle John said…

Ben, I love the packaging on the Southbound strings.  Whoever came up with that was inspired.  They would even make a good git top.   Lots of nice stuff out from you.

At 5:27pm on September 12, 2014, shane gibson said…

Got my 1st canjo today its so much fun 

At 1:28am on May 23, 2014, Muddy Creek Guitars said…
Ben,

I was unable to use my coupon for my entry in the builder's challenge at cbgitty.com. I left a message through the contact link at the website. I noticed you were online here, so I thought I'd send you a message here in case you could give me a quick answer.
Thanks!
I appreciate all you do!

John Draws
Muddy Creek Guitars
At 1:56pm on February 17, 2014, RJGRAPH (Eldridge CB Guitars) said…

Congrats on the Front Page article in the fosters last week. Store open maybe?

 
 
 

The Essential Pages

New to Cigar Box Nation?How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

 

Recommended Links & Resources

Featured Instrument Video

Forum

Building to sell

Started by Mark Rinehart in Building Secrets, Tips, Advice, Discussion. Last reply by Jerry Jordan on Thursday. 4 Replies

Latest Activity

Jim Morris commented on shane wagstaff's video
Thumbnail

Wall light banjo

"Excellent!"
8 minutes ago
Jeff 'Bones' Reilly posted photos
18 minutes ago
Spencer Lockhart commented on Uncle John's video
Thumbnail

My Babe

"That is a phat axe and I am diggin on this song man!!!"
36 minutes ago
Spencer Lockhart liked Uncle John's video
38 minutes ago
Spencer Lockhart commented on Spencer Lockhart's photo
Thumbnail

Robusto Rezo

"Thank you man!"
44 minutes ago
Richard Sundberg liked Uncle John's video
1 hour ago
Richard Sundberg commented on Uncle John's video
Thumbnail

My Babe

"It might be the Choo Choo Train Lynas slide, but that train is playing on right on time! Your…"
1 hour ago
Taffy Evans replied to Paul Craig's discussion What's on your workbench?
"Hi, that's a nice conversion Darryl. Here's another small bandsaw conversion I did couple…"
1 hour ago
Derek Rose liked RTZGUITARS's photo
1 hour ago
Dave Lynas commented on Spencer Lockhart's photo
Thumbnail

Robusto Rezo

"Worn off just right! Friendly old guitar."
1 hour ago
Dave Lynas liked Spencer Lockhart's photo
1 hour ago
Dave Lynas liked Daniel Walter's photo
1 hour ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->