The making of a biscuits box guitar

Here is the back of the neck with the homemade mechanics for strings
Read more…
E-mail me when people leave their comments –

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

  • he littlebigone - it sounds like we've both been following the same path to simplicity.

    my goals have also been to produce an instrument that others can build and play with the least tools and effort possible.

    i agree with you on many points about my tuners:
    -it is difficult to drill the holes straight, i've had several crooked
    -it requires a drill (which is the only power tool i still use)
    -it is not very easy for a novice to tune with

    however, mine stay tuned just fine, i travel and play them all over, at bars and pubs, and they only ever need a slight adjustment. they are really more of a proof of concept, that it *can* be done.

    however, now that you've inspired me in a more proper direction with them, my builds may change.

    thanks so much for your detailed response!!!
  • (for unknon reason the end was cut by ning) ...

    ...When you are finished with the tuning it will keep for a long time even if you travel hard
    with the guitar. That's it and it is a LittleBigOne homemade tuners that I invented for
    LittleBigOne's guitars of mine :-)

    Enjoy!
  • Hi Crow,

    My vocabulary may not be enough but I will do my best to explain as much as I can.
    My main idea was to build high quality but low cost three strings guitars so that kids or anyone
    with a low budget could build some on their own. After some time I had tested differents methods
    and materials, wood or metal, simple piezo or full cell, different kind of strings, neck passing
    through the box or not, and which side I could stick the neck to the box. Eventually the main
    remaining problem was I still had to buy mechanics and they are really expensive. In my town I
    could not find anything under 20 euros and that was not for electric string guitars, after that the
    prices jump highs. Even buying mechanics from internet is quite expensive because of the
    postal shipping costs.

    I tried many tips and tricks to replace standard mechanics with something homemade. I tested
    yours too but I was not convinced because of two problems: First you need to drill the neck from
    left to right and depending on the width of the neck and of the quality of the wood (some are really
    strong), that may be quite a challenge to drill straight. And I am a good woodworker, so think to
    what the problem will become for a kid with no particular tools nor experience ... :-S
    Second, your tuners don't keep tuned even if you hold it strong, at some point some time later
    (hours or days) the strings are not tuned anymore and that may be a problem for a kid too.
    Though I found later that this problem could be solved by adding a one-way nut after the
    wing nut to lock it...

    Another solution I tried was to set the bolts like yours from front to rear, instead of left to
    right. Though it was better, it came even better if you attach the string to the wing nut
    instead to attach it to the bolt. It's simpler to tune but not really comfortable :-)
    anyway it's only a matter of taste because some may argue it was not really simpler
    to tune.

    One of the most important thing I discovered is to send the strings to the back of
    the neck because it will lower the tension on the neck big and will prevent the neck
    from bending. This even allow people to use not expensive hard wood for the neck
    with no risk. Of course on the other side of the guitar you absolutely need to attach
    the strings to the neck-passing-through and don't even think to attach the
    strings to the box or anything else :-)

    So if you watch at the strings coming from the bottom of the guitar to the top, and
    passing through some holes to reach the backof the neck, the simpler was to hold them
    from the top of the neck so not to add any more tension on the strings.

    If you simply attach the strings to the wing nut it will not work. The secret here lies in
    how to attach the strings to the wing nut. You need to have the string going from one wing to
    another, so when it will be under tension the tension of the string will keep your bolt
    straight by alone, and you don't need to add anything to maintain the bolt straight.

    You can use whatever kind of strings you want, classic folk or metal strings... If you have a
    low budget you can use nylon strings or 4 mm fishing nylon strings like many other people do
    for ukuleles on other countries - believe it or not but it gives an incredible sound with a
    full cell piezo in a metal cookie box (vibrating plate not pierced) and a folk guitar bridge !

    Once the strings are attached, they are pretty easy to tune by turning the bolt with a key
    (mine is 8 because the bolt is 5 mm) Here some people may use some bolt that you turn
    with a flat screwdriver, depending on your country but in mine country this model is too
    expensive.

    For each string you tune, lock it with a nut added after the wing nut so it will not move
    even slighlty while you are working on the other strings. This is very efficient and will
    prevent the strings to un-tune even if the bolt move.

    When you are finished with the tuning it will keep for a long time even if you travel hard
    with the guitar. That's it and it is
  • and can we get a clearer picture????
  • yes, yes YES

    a million times YEEEESSS!!!!!

    tell me about these tuners! they freaking rock!!!

    i use eyebolts sideways, as tension tuners, but i've always wanted to use bolts *properly*, so that i could turn the bolt, and have the thread pull a bolt and string back, using the mechanical advantage of the bolt to tune the string...

    SO...

    what parts did you use?? i can see the bolts and the wing nuts, but what brackets? how are they set up???

    please tell me more!

    GREAT WORK! it's innovations like THIS that really make a difference!
This reply was deleted.