Posted by Mark Lindsay on April 9, 2012 at 10:37pm
Trying out a headstock design, and I don't want to copy a design that's already out there. I need your input - does this look like I'm ripping someone off?
Read more…
I also started with the radius cut instead of the strait cut, it had a better flow. The strait cut was only used a couple of times. I am also doing the scarfed neck joint. I should have pictures up as soon as I get my computer up. My web site is getting tweaked this weekend and should have all my new pictures put up.
Yep, they're very similar. I also have that 3/4" radius cut into the bottom, where the neck transitions into the headstock, where yours are cut at straight angles. I'll tweak my design a bit more so folks won't confuse the two. This is why I asked for input. Thanks!
Comments
Yep, they're very similar. I also have that 3/4" radius cut into the bottom, where the neck transitions into the headstock, where yours are cut at straight angles. I'll tweak my design a bit more so folks won't confuse the two. This is why I asked for input. Thanks!