Photos

CBA #2 Beginning

Posted by Maurice Brines on December 11, 2009 at 11:36am
Beginning the build using Epi Valve Jr 5 watt guts and a cigar humidor box
Read more…
Previous
Next
E-mail me when people leave their comments –
Follow

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

  • Maurice Brines December 12, 2009 at 10:53am
    Retrorod, on a previous CBA project I built a speaker cab out of two Toro Maduro cigar boxes glued together. Check out CBA #1 in my photo section. I used two Jensen C8R's. Both are 8 ohm, 25 watts each. I parrallel wired them to end up with 4 ohms, which satisfied the output of the solid state amp. On the CBA #2 amp, I added a tap for 4 and 8 ohm, so I can use the Jensen cab or another cab that I have from Avatar that's 8 ohms, with one 12 inch Celestion in it.
  • RETROROD December 11, 2009 at 8:18pm
    What speaker(s) do you plug into?
  • RETROROD December 11, 2009 at 8:17pm
    I see now. Disregard my question on what amp this is on a later post...I got ahead of myself..Ha1
This reply was deleted.