Photos

Comments

• 

  Dave Lynas February 27, 2013 at 4:52pm

  Thanks for the info. I'll look into the router bit. I've got tiny router bits for my dremel but they are free cutting bits. Do you use a jig? And does the bit have a bering on the shaft? So many ?s..
• 

  Jett Pink February 27, 2013 at 12:31pm

  That sounds really cool! And thanks for the tips Penny. To cut out the hole, I used the router attachment and bit for my Dremel. It worked well enough and was pretty easy to control. I definitely did a few practice runs on scrap wood before I did it for real though.
• 

  Dave Lynas February 27, 2013 at 11:05am

  I've got some nice Japanese coins from 1944 (my b day). I want to inlay into the relic MIJ guitars i'm working on lately. They look cool and in a way caused the MIJ invasion of the 60s. They are war coins made cheaply to help their war effort.
• 

  Dave Lynas February 27, 2013 at 11:02am

  Thanks for the tips Penny and Jett. What bit did you use to cut it?
• 

  Penny Nelson February 27, 2013 at 7:39am

  if its a snug fit you can just use some water to expand the timber to hold it tight.
• 

  Jett Pink February 19, 2013 at 7:30pm

  I just put a dot of my regular wood glue (Elmer's)- hasn't fallen out yet! It fits pretty snug in there anyways, it stuck in the hole without any glue
• 

  Dave Lynas February 19, 2013 at 6:37pm

  Could you let me know what glue you use for your coin inlays? I want to add some to my builds. Thanks