Photos

Comments

• 

  Turkeychicken April 13, 2014 at 7:45pm

  Posting a video is harder than the actual finishing process.
  
  Tear craft paper into pieces, no cut edges.
  Crumple up your pieces. The tighter you wad them, the more "grain" you will have once it is finished.
  Mix the glue and water about 50/50 to thin it down.
  Coat both sides of the paper with the glue mixture to saturation.
  Apply to box and smooth out all of the air bubbles and wrinkles.
  Spray with 2-3 coats of polyurethane.
  
  Its so easy, a caveman could do it..... ;-)
• 

  Richey Kay April 13, 2014 at 3:55am

  Gorgeous
• 

  Muddy Creek Guitars April 13, 2014 at 3:03am

  Any way you could post a video of this?
• 

  Turkeychicken April 13, 2014 at 1:44am

  Would you believe me if I told you all I used was craft paper, elmers glue, water and polyurethane spray?
• 

  Muddy Creek Guitars April 13, 2014 at 1:26am

  How do you achieve that kind of finish?
• 

  Turkeychicken April 12, 2014 at 6:17pm

  Thank you. Was a raw wooden box, I did the finish.
• 

  Muddy Creek Guitars April 12, 2014 at 3:55pm

  Beautiful!
  Did the box come like that or did you put a finish on it?