Built this dobro a while ago. The intonation is a little sharp at the 12th fret. It’s good when playing with a slide though. My question or comment is... I don’t see a way to correct the problem once the guitar is finished.when the hole for the cone
Read more…Hey out there, any wiring diagrams on psycho knob install in a guitar with vol.and tone pots? Thanks in advance
Read more…Sorry for the delayed response. I installed the knob and it worked for 2 days. However there were some issues. First, when switching from 1st.to 2nd pos there was a loud cracking noise. As I went through the positions the vol got louder,but the disto
Read more…Sorry for the delayed response. I installed the knob and it worked for 2 days. However there were some issues. First, when switching from 1st.to 2nd pos there was a loud cracking noise. As I went through the positions the vol got louder,but the disto
Read more…Hello all, I picked up a neck from a 6 string solid body. Any ideas or pictures of the best way to install it into a cigar box? I never used a pre made neck in any of my builds. Any help will be appreciated, thanks.
Read more…I'm having trouble sending a picture. I get an email stating delivery failure. I've tried a couple email addresses. Still can't get through. Any suggestions? Thanks
Read more…Good morning out there,I'm looking for some plans for a resonator build. I saw some here a wile ago. Any info. Would get me started. Thanks,Bizzaro
Read more…I am looking for a way to install a tele pup in my next build. I saw a drawing on this subject here once.Should have saved it! Any one have any pics they would like to share? Thanks in advance.
Read more…Hello nation, just picked up a new soldering iron, 40 watt weller.is this good for pups,pot'sand jacks? Thanks Bizzaro
Read more…Hello nation, can any one tell me how to wire 2 piezo's in parallel? I want to use a pot,2 piezo's and a jack. Also ,another way I was thinking of is using 2 vol. pots. Is this a good idea? What do you think?Thanks .
Read more…Trying my hand at soldering,what type solder should I be using? 60/40 etc. flux,no flux ? any sugestions would be a big help. thanks
Read more…thanks for the advice,all good sugestions.I defenetly will be thining it out,also will pick up some spray .I finaly made a neck I think looks like it should and I screwed up the lacquer! when it dries I will be sanding it down. Then re do it right.
Read more…thinking about building a guitar like john lowe's low bow.Any one out there have any input I can use, it would be helpful. Never saw one close up,just people playing them on this web. Could use picture's etc. any info. would be appreciated. thanks
Read more…thinking about building something like john lowe's low bow. anyone have any input,I could use pictures etc. never saw a close up picture of one,just people playing one.also tuning info.would help.thanks
Read more…Good morning nation, I switched from polyurethane to lacquer on my latest build. seems that the lacquer is thicker.( using Deft gloss brushing lacquer). when I brush it on (bristle brush) it dosen't lay down flat. the lacquer comes out bumpy. where
Read more…I'm looking for some info. on how to angle a head stock on a 1x2. I just made a 4 string with angled headstock,but I think I over complicated the process. any suggestions would help. thanks.
Read more…I notice that most cbg's use open g or d tuning from what have been reading . what about open E, any suggestions ? So far I have only built 3 string cbg's.have them tuned to D and G. thanks
Read more…hello nation, can anyone give advice on a good width for a 4 string neck? thanks.
Read more…