Replies

  • Wichita Sam April 18, 2012 at 8:34pm

    take a three string plan and add a string... presto... 4 string CBG.... don't over think it...

  • Steve wootten April 16, 2012 at 10:56pm

    i agree with glenn in this case use your not so good boxes for your first attempts and as you gain some skills then use the  good boxes

  • Glenn Reither April 15, 2012 at 10:13am

    Don't sweat the first one too much. You'll learn heaps by making it and your second one will be 100% better. Just start. Use cheap materials and and crappy looking box. Save your good stuff for when you have some more skills.

  • Glenn Reither April 14, 2012 at 10:46pm

    If you look at the top of the page in the middle, you'll see a mysterious link called "Free Plans" :)

    • Billy R. Ousley > Glenn Reither April 14, 2012 at 11:11pm

      All I see there is plans for a three string.

       

    • Glenn Reither > Billy R. Ousley April 14, 2012 at 11:36pm

      Add a string! The principles remain the same for all thru-necks. For a 4 string, I like a neck width of 38mm. That gives 10mm spacing with 4mm on the sides.

    • Billy R. Ousley > Glenn Reither April 15, 2012 at 10:06am

      Thank you for the advice. I thought that would be the thing to do, but I wasn't sure.

       

      Billy

  • Charlotte Henry April 14, 2012 at 11:57am
    The problem with plans is that box sizes vary and scale length is a personal preference. You can go to my page and look through my pictures and get an idea and then keep looking at everyone else's stuff and you will figure it out pretty easy.
  • James Bush April 14, 2012 at 11:21am

    I sell 4 string kits with instruction DVD www.mojocbg.com

     

This reply was deleted.