Looking at fret measurements from StewMac, it seems that if using metric, fractions of mm are virtually impossible to place correctly.

Because mm's are so small, I think that a simple '+/-   .5mm is close enough on a steel.
Fret #9   (10.135mm( becomes 10mm

Fret #10 becomes  (10.969mm)  11mm

Thoughts?

Views: 442

Reply to This

Replies to This Discussion

Pull it out with a tool: 

No frets, it's just slotted. I'm trying to figure out the proper scale dimension.

Hi James, if you cut the fingerboard off at the zero fret keep in mind that the scale length should start from the centre of that slot, which would be on the center of the fret crown, if it had a fret. 

Be careful that if you put a saw in the slot that is wider than the slot you could shorten the scale. Then again if the whole board is going to be fretless it will not matter.

Taff

Actually, I think I figured it out. I'm gonna use the slot/position to set the nut....which is going to be all-thread with acorn nuts (for looks) on the end, so there is space under the nut. The nut will be set directly above the '0' fret.

A Bone or synthetic nut might fit with some modification, maybe a time to stretch out & try something different? Maybe share a pic, hard to say without seeing it? Define Scale dimension?

"Define Scale dimension"

Sorry, it was late. I was trying to say I was trying to find the correct datum point for the nut/fretboard interface...

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Korrigan replied to Southern Ray's discussion AI Search Query - Curious Answer
"Yes A.D., an old cabbage slicer. Which is also called a mandolin.  :-D"
26 minutes ago
Gary O'slide posted a video
2 hours ago
T-Gripped liked Darryl Tuttle's photo
3 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"That is a mighty fine answer and not too lengthy considering all the information you…"
3 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
8 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"Thanks Uncle John! I’m always delighted when other Slingers choose it to play."
8 hours ago
J. D. Woods commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Hi Uncle John, Ha, ha!! So glad you asked, I wondered when somebody was gonna notice! I'll try…"
8 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

"Colorfull Build  AGP # the last colorfull song they will  ever build ,the feud is going…"
14 hours ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

Jose Cuervo | Shelly West cover on 4-string CBG

"its good to hear you are part of the "Old Content" did not get any of this ,but you…"
14 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Good morning UJ ,How are you ? hope you are fine! i did say "CrossRoads",Blues Rock its a…"
14 hours ago
Uncle John commented on J. D. Woods's photo
20 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
20 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->