Take the lid off two larger boxes. Piano hing one side add a preso its hard to describe spring the inside. Set it on a slight leaning hinge side up.should be quite bace.
Thanks, I will have to re due the one I made with a speaker instead. I have a few that don't work so well with my small amps, should be fine for stomping on.
I have seen some that says you need to reverse the wires on the speaker to the jack and others say it is not necessary to make it a mic, which it correct?
Thank you so much Tea, that even looks like it would make a great sound. I haven't built a CBG or a stomp box. Just trying to get all the information I can. Things go slow for me as an old man on SS must take my time to get all stuff gathered.
I made one using a piezo, and its not so great. Do you think the speaker for a "mic" is better for foot tapping?
tony `Tea Belly` johnson said:
This may be of some help.I built it july this year and it works fine,good bass and can be used either by foot or hand/fingers as picks up well.Also there seems to be very little,if any,feedback.
Replies
Thanks, I will have to re due the one I made with a speaker instead. I have a few that don't work so well with my small amps, should be fine for stomping on.
Thanks for the comeback Tea.
I have seen some that says you need to reverse the wires on the speaker to the jack and others say it is not necessary to make it a mic, which it correct?
Thank you so much Tea, that even looks like it would make a great sound. I haven't built a CBG or a stomp box. Just trying to get all the information I can. Things go slow for me as an old man on SS must take my time to get all stuff gathered.
Thanks again,
Jim
I made one using a piezo, and its not so great. Do you think the speaker for a "mic" is better for foot tapping?
tony `Tea Belly` johnson said: