The cigar boxes I have all have a paper lining in them.  The 1st one I did I removed the paper up to the point where it went under the label that rolls into the box. This left a bit of glue that had been used to attach the paper at the top edges.  I was wondering if leaving this paper in the box will effect the sound that resonates from the inside?  

Dan

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Email me when people reply –

Replies

  • I think you have to remove everything. In my opinion leaving any piece could make a difference with the sound. 

  • What Richey and Scott said. Some boxes have a paper liner that's just glued along the top edge, leaving the rest of the paper loose inside. I remove that paper by cutting it out along the glue line. I also scrape/sand away any paper that's glued to the inside bottom of the box. As Richey Kay says, that way I'm gluing to the wood box instead of the paper lining.

    I don't know if it effects the sound or tone of the finished guit, but I prefer looking into the sound hole and not seeing a bunch of loose paper flapping around in there. That's just me.

  • Doesn't really make that much of a difference. Another way to look at it is if the outer label is a bit weathered or stained, you can flip the lid to use the inner label, since those are usually in better condition.

  • I suppose it would... but probably not in a way you'd be able to tell... I always remove the paper from the inside so I can glue the neck supports to the box rather than the paper.
This reply was deleted.