I was looking around at some other discussions and saw someone mention about using carbon fibre for frets.
This got me thinking. I have a small off cut from a tent pole that is made of fibre glass (i think. i doubt its carbon fibre.)
If i mounted in in a piece of hardwood or something, would it make a decent bridge?
I cant find any metal of the right thickness and i don't have access to bone, so i was wondering if this would work. Has anyone else experimented like this?
You need to be a member of Cigar Box Nation to add comments!
i managed to wire it up to an amp and it works, so now i know how the pots will be wired.
Don Goguen said:
Looks like a standard coax signal wire. The center is positive and the bare outside wire is ground.
St Ginger said:
unfortunately its a cheap aresed thing from ebay, so the wire is actually one sinlge blue wire, with what looks like an inside core and a surrounding core. i've attached a photo i think.
Looks like a standard coax signal wire. The center is positive and the bare outside wire is ground.
St Ginger said:
unfortunately its a cheap aresed thing from ebay, so the wire is actually one sinlge blue wire, with what looks like an inside core and a surrounding core. i've attached a photo i think.
I have used steel,(bolts,eyebolts,)copper,corian,and aluminum.I would try anything hard once. Most of my bridges have been floating . so if the final result isnt pleasing I just pop it out and start over. The only material I wasnt happy with was the copper. I had a feeling it wasnt gonna work out too loud,but the build was for a display with looks more in mind than playability. I find aluminum to be my favorite. I am guessin Randy is correct about the wearing issue. But Im sure it would give years of service under light use.And decsent service with heavy use. If you use the the fiberglass I would try a drop of superglue in the string slots after your final filing is done.Thats how luthiers repair old nuts when the string slot wears out. You put a lil baking soda in the slot, then drop a lil glue on it.let it dry and you got a strong slot that I hear lasts for years.
unfortunately its a cheap aresed thing from ebay, so the wire is actually one sinlge blue wire, with what looks like an inside core and a surrounding core. i've attached a photo i think.
the standard is for red to be positive and black to be negative, but it varies. I installed some lace sensors in a strat not long ago where the colors were orange and green if i'm remembering right.
St Ginger said:
Thanks for the advice guys.
I might use this for another build. I want the one i'm working on to go smoothly, so i won't risk it.
My pickup for this build just came through the post, and i was wondering, how do i tell which of the wires is the positive and which is the negative, and does it matter for wiring up?
I might use this for another build. I want the one i'm working on to go smoothly, so i won't risk it.
My pickup for this build just came through the post, and i was wondering, how do i tell which of the wires is the positive and which is the negative, and does it matter for wiring up?
you can try nails, bolts, threaded rod, hinge pins, etc. I had good luck with a piece of copper ground wire on my last build. I've also cut pieces out of a $1.00 plastic plate from walmart and glued them together until I got a piece that was ~ 1/4" thick, then shaped it with a dremel and sand paper. That worked well enough.
Anyway, I doubt that fiberglass would work very well.
Randy may be right, the fibre glass will wear with use, but it is worth a try and it may take a long time before the grinding is enough to matter. Be the first try it and let us know how it sounds and lasts.
Replies
i managed to wire it up to an amp and it works, so now i know how the pots will be wired.
Don Goguen said:
St Ginger said:
Does it actually matter which way round it goes?
100618-230350.jpg
St Ginger said:
I might use this for another build. I want the one i'm working on to go smoothly, so i won't risk it.
My pickup for this build just came through the post, and i was wondering, how do i tell which of the wires is the positive and which is the negative, and does it matter for wiring up?
thanks again
Anyway, I doubt that fiberglass would work very well.