Ok I've scoured the Internet looking for a template for a cigar box fiddle. I found a good candidate for the box. A narrow starrett machinist level box. Does any one know where I can get a good drawing with dims for a neck ? Thanks in advance
You need to be a member of Cigar Box Nation to add comments!
Thanks guys. The plans don't have enough detail. I want to build a more conventional fiddle neck like reeds. Reed how much of an angle is put in the head stock ?
Replies
P.S....the dowel goes thru the front block into the neck.
I carved this from a picture I seen on the net.
You can see how I mounted the neck here. Hope this helps somewhat.
We got plans right here on CBN.
http://www.cigarboxnation.com/page/free-plans