Before I do any more potential damage, need direction from group. When installing screw inlays, I followed a video that showed stepped drill diameters and removing top for countersinking screw head.

I have several that do not tighten down and are not flush with fretboard. Do I need to go to a larger diameter screw, add some sawdust or glue to the hole? Any help appreciated

Views: 158

Reply to This

Replies to This Discussion

Short piece of toothpick and a dab of glue also sounds like hole should be just a smidgen deeper. Same with the counter sink.

I do know how to speak English! For the loose fitting holes, use a toothpick and a dab of glue to give the threads some bite. Next time use a lightly smaller bit and go a little deeper.

Hi Brent, the way I would do it is to countersink by hand, let the screw embed itself into the hole then with a sanding block level all the screws at the same time. Come finer with the sanding grit for a better finish. 

Brass screws look great this way. Make sure you line up the slots in the screws uniformally. 

Taff

I can recommend getting a set of oblique hole countersink bits. The look slighty different from other countersink bits and have the almost magical power to self depth limit based on the outer diameter of the bit being smooth and solid. You do need to drill a pilot hole first but. 

The screws will then bottom out at a uniform depth and shouldn't have to be sanded flush.  

https://www.ebay.com.au/sch/i.html?_from=R40&_nkw=oblique+hole+...

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Gary O'slide posted a video
14 minutes ago
T-Gripped liked Darryl Tuttle's photo
1 hour ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"That is a mighty fine answer and not too lengthy considering all the information you…"
1 hour ago
Doug Thorsvik commented on Doug Thorsvik's video
5 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"Thanks Uncle John! I’m always delighted when other Slingers choose it to play."
5 hours ago
J. D. Woods commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Hi Uncle John, Ha, ha!! So glad you asked, I wondered when somebody was gonna notice! I'll try…"
6 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

"Colorfull Build  AGP # the last colorfull song they will  ever build ,the feud is going…"
12 hours ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

Jose Cuervo | Shelly West cover on 4-string CBG

"its good to hear you are part of the "Old Content" did not get any of this ,but you…"
12 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Good morning UJ ,How are you ? hope you are fine! i did say "CrossRoads",Blues Rock its a…"
12 hours ago
Uncle John commented on J. D. Woods's photo
17 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
17 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

Four projects

"Nice, nice trio."
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->