Videos

Posted by Bad Finger (Eric) on March 11, 2012 at 7:10am

191

Get Embed Code

<iframe width="459" height="344" src="http://www.youtube.com/embed/PLvV0ErimYw?fs=1&amp;feature=oembed&amp;wmode=opaque" frameborder="0"></iframe>

acoustic, fret, maple, oak, padron

Padron box, bone bridge, oak neck, maple fretboard, skull tuners, finger pickin good.

You need to be a member of Cigar Box Nation to add comments!

Bad Finger (Eric) March 19, 2012 at 4:38pm

Thanks Roadkill & smojo.
smojo March 18, 2012 at 12:14pm

cool
Roadkill a.k.a. John Maw March 13, 2012 at 6:41am

Very nice tone from that and nice relaxing tune.
Bad Finger (Eric) March 12, 2012 at 11:07pm

Thanks pick, Keith.
the anonymous pick March 11, 2012 at 7:27pm

sweet .
BUGGY (C) March 11, 2012 at 4:39pm

https://www.youtube.com/watch?v=7z9_pr7ntwk&feature=youtube_gdat...
BUGGY (C) March 11, 2012 at 4:36pm

There's a guy on YouTube that's made a cool box file
Device that does the job well
I will see if I can find a link
Bad Finger (Eric) March 11, 2012 at 4:25pm

I don't know. We were not successful in leaving a crisp fretboard. I had to chamfer it all the way.
BUGGY (C) March 11, 2012 at 4:15pm

Yeh I agree with that , I find they jump out when you file them too
What's the trick to keeping them in place as you file and not trashing the side of the fingerboard?
Bad Finger (Eric) March 11, 2012 at 3:53pm

Thanks Paul and bemuzic.

My six year old daughter hammered every fret. I cut the slots. We don't even know what we are doing and found it easy. Our only tools were a coping saw, dead blow hammer nippers and a file. Not perfect, but we are happy with it.

The toughest part is dressing the fret a without touching the fretboard.