I'm starting my first resonator build and was wondering if there is anything particular about to the distance between the tail piece and saddle? I would be using a normal drop in cone with a biscuit and saddle screwed to the cone.
Dave, generally it doesn't matter as long as you can get a good break angle over the saddle with your strings, the critical measurements are from the saddle forward
Comments
Check http://www.cigarboxnation.com/forum/topics/setting-out-from-the-beg... for answers to your questions.
Dave, generally it doesn't matter as long as you can get a good break angle over the saddle with your strings, the critical measurements are from the saddle forward