Cabin fever project, started as a yardsale jewelry box of some dense fine-grained mystery wood with good tone. Coupled with an old tool handle. The fred board is 1/4 by 1 inch strip of teak scrap. I glued it to the top of the handle and then addeed 1/4" dowels on each side. The profile feels good in the hand. Brass rod at zero fret, coat hanger wire for other frets. Bridge is a biscuit joint wood wafer with brass rod. Gitty piezo and parlor tuners. Ernie Ball #30 and 16 strings tuned to D and A. The frets are set up like the diatonic scale on a dulcimer, easy to pick, no sour notes. Raven is internet clip art, printed on paper and glued to back. Top finial and strap button are drawer pulls. I used Titebond glue, acrylic paints and shellac seal and finish inside and out. This box surprised me with it's volume and resonance, fun to play and I'm keeping it.
Read more…
Comments