Photos

The Predomin CBG

Posted by Jeffrey Zahn on September 15, 2010 at 1:16pm
It took me about 40 total work hours to make this. I spent a few hours a day.The box is obvious, the neck is poplar, the frett board is maple, I custom made the bridge from maple, the fretts are made from wire hangers.
Read more…
Tags: Build, CBG, Guitar, New, builds, cbg, pictures
E-mail me when people leave their comments –
Follow

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comments

  • Jeffrey Zahn September 17, 2010 at 12:02am
    It is inside. Its a small piezo, 3/4 inch diameter. I drilled a flat bottom hole under the bridge and glue the piezo in then glued another piece of maple over it and sanded, stained etc. Of course I drill a small hole for the wires then drilled another hole in the body to feed the wires inside.
  • Bluesheart September 16, 2010 at 10:04pm
    NIce work. Is the piezo mounted in the bridge, or just under it?
This reply was deleted.