Old No. 7 Brand “Double-Jack” Tenor/Bass GittyGot a bottle of “Jack” for Christmas… I immediately got an idea for a new build, but as you can see I had to do a lot of “research” while doing the design phase!This build is my third attempt using this design… I had my first “accident” ever, in over fifty five years of woodworking, attempting this build! Lesson learned: Never use a router bit in your drill press for thickness planing! Purchase the Stew Mac Safety Planer for your drill press instead and save your fingers.I’ll try and cover the majority of what went into this build. But if I miss anything please don’t hesitate to contact me.All of the parts, with the exception of the “Cherub GT6 G-Tone”, were purchased from CB Gitty Crafter Supply (many thanks again Ben!).The Jack Daniel’s tin boxes are lined with poplar. The through body necks are maple. Tenor fret-board is CB Gitty Peruvian walnut. Bass fretless finger-board is red oak. .The finish is a combination of Ebony coloured (colored) Aniline dye and high gloss lacquer. The fret markers were cut from 1/4” aluminum round rod. Bass fretless frets were applied using a silver-metallic Sharpie marker pen. The x-connector bars were cut from 1” square aluminum tubing.I made the wiring harness using a uke rod piezo for the tenor and a 3-pole rod piezo for the bass wired in parallel (I was going to use a 3-way switch to select each gitty individually, but saw a Shane Speal video clip and decided to keep both gittys active at the same time. (Thanks Shane!)).The wiring harness is connected to the Cherub GT6 G-Tone “gizmo” with a 3mm mono plug. This teeny weeny electronic device is wayyyyyy more than a pre-amp. It is a formidable little thing with tuner, pre-amp, 3-way equalizer, reverb, delay, chorus, wide and phase functions that puts out as much “hoop” as my 100 watt Fender twin reverb tube amp. I purchased it from TomTop.com for US$25. I built a similar pedal board 20 years ago at a cost of US$1,000! I paid $850 Canadian Loonies (2-bit US buck) for the Fender amp!I am really proud of this build. On a skill level of 1-to-10 I’d say it was a 12. Most people shouldn’t attempt this type of activity without more sober, non-euphoric and responsible adult supervision. I strongly believe my next build will be based on beer “research”.Gotta go. Gotta date with the kegerator in my man cave.Rock on!Gittys by George
Read more…
Comments