Gender
Male
Location
Grand Junction, CO
Birthday:
December 23
I have been building my CBG's with 1 X 2 maple. I have given one to a friend and he says that the neck is starting to bow. Is this a problem others have seen and any suggestions on how to prevent bowing would be welcome. Thanks.
Read more…I am trying my first scarf joint headstock for a 3 string fretless. I'm using a 1x2 piece of maple for the neck. Does anyone cut the width of the headstock down to accommodate the tuners? The tuner install instructions recommend 5/8" as being ideal.…
Read more…I am building my first electric CBG and have purchased the "Electric Delta" 3 pole pickup sold by CB Gitty. Is there a "rule of thumb" measurement for the distance between the strings and the pickup? The guitar is fretless, so the height of the…
Read more…I am new to CBG building. I have built 2 so far and I have used 5/16 bolts for the nut and bridge. I recently bought two laser-cut wooden bridges and two bone nut blanks. My question is: the wood bridge is considerably higher than the 5/16 bolt.…
Read more…
Comments
Welcome to the nationLou, check out the Resources tab