And the same one, with the boxed tricked-up..blown over with some primer and beige paint, knocked back on the belt sander and a print of the poster glued on and misted over with a couple of coats of clear rattle-can lacquer.
Here's one with the headstock cleaned up a bit..smoothed down on the belt sander and the back of the neck profiled..plus a different set of 3-on-a-strip tuners.
Replies
I was so pleased with the response to the workshop..the guitar making is something that I'll have to arrange again..and soon!
dogfinger steve said:
And the same one, with the boxed tricked-up..blown over with some primer and beige paint, knocked back on the belt sander and a print of the poster glued on and misted over with a couple of coats of clear rattle-can lacquer.