Replies to This Discussion

Permalink Reply by terry harris on July 3, 2013 at 3:48am

I think what I'd do is kinda guesstimate the inside volume (cubic inches, cc's whatever) of a bari and build a box from there, same sound hole size and all. Like to know how this turns out.

Permalink Reply by Mark Bliss on July 3, 2013 at 6:57am

Hey John,

 

While a larger box might be desireable for acoustic reasons, I wouldnt put too much weight on that issue alone.

 

You mentioned elsewhere that you were considering a resonator cone?

Permalink Reply by HarleyTodd on July 9, 2013 at 6:01pm

I just finished a uke last week. Pretty happy with sound on it. It's not a baritone, but close, 18" scale length, so a bit longer than a tenor. Box is medium size, will measure and get some pics in a day or so. I would like to keep in touch with your progress cuz I want to build a 4 string guitar or baratone uke next.

Permalink Reply by Fomhorach on May 15, 2016 at 4:49am

I used this box..

To make this baritone ukulele

Permalink Reply by Bob Johnston on March 28, 2017 at 2:17am

Awesome build!  Did you install a pup?