Recently picked up a cheapo Skil 4x36 belt sander with the side disk sander.....and I was wondering what you pro's would suggest for most needed sanding grits? and the material used for the grit (aluminum oxide?) or?......I have also noticed some belts that are butt jointed, Im guessing those are the best?..Thanks again, yep, I'm still working on my first build but I have also started my second so when I get hung up on one, I go to the other...LOL....also have started on a primitive mag pickup made from Popsicle sticks and cheapo magnets.....had to purchase the wire though....

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Email me when people reply –

Replies

  • Thanks for the info, didn't think of Ace Hardware, we do have one of those.....I did pick up some 120 grit for sanding smaller pieces like the bridge at Home Depot. But for some reason I didn't think of wear and buying extra belts. Par for the course for me........Thanks again.....
  • I let the belt sander do as much work as possible - I have coarse, medium and fine belts, which are 50, 80 and 120 respectively. From there I would hand sand if necessary with 120, 220, and possibly 360. Garnet paper (orange color) is the best for that.

    The belt sander belt I have is the Ace Hardware house brand called Gator Grit. They're butt jointed aluminum oxide and seem to work just fine. I buy extra 50 grits when I'm buying belts because I use those the most, so they wear out quicker.
  • Thanks for the extra info, much appreciated, yea the belt on the sander does look aggressive, so a light touch is in order. I may have to think of making my own jig, thanks for putting the idea in my head......Mike
  • Be one quick way to shape the back of a neck! I've only used a belt sander once. Like wiser folks have stated, removed way to much to quickly. As far as the paper goes itself, like any other tool you get what you pay for. Don't get cheap belts. Having one come apart on ya could damage your project. Also like any other sand paper, better paper lasts longer and does a better job. As far as grit goes that depends on what your doing. Because of the amount of wood this thing will eat I'd start with an 80 grit. and go lightly with it till you get the feel. I've seen some jigs set up to do radius's using belt sanders on line somewhere. Kinda elaborate setups.
  • Thanks , just the info I was looking for, now I dont need to pick up a large variety of grits......
  • Yep, that's my vote, fast removal.
    Don
  • The belt and disk sander isn't really used for fine operations; you just want to take a lot of material off very quickly. I only ever bother to put 60 or 80 grit on mine. Everything else I do by hand.
This reply was deleted.