Hey everybody!

 Trying to save some money and I am in need of some advise, leads, tips or what-have-you on AA, 9V, D and other rechargeable batteries and where to buy them. Applications vary from guitar amps and pedals that I will be building. Perhaps 3 18650s for 11.1 volts? 12v dry or gell cells... to flashlights and other small electronics. I need to do it as safely as possible, keeping in mind that some of these things like to mimic fireworks. Any help or thoughts would be most appreciated.

Views: 195

Reply to This

Replies to This Discussion

If you are going through a lot of non-rechargeable batteries, then the investment in rechargeables (and the necessary charger) might make sense. The initial investment isn't that cheap. Eight mid-line rechargeables will cost around $20. A basic charger with four batteries will cost another $15 or so. So you're going in with around $35 for min-level batteries.
My experience is that rechargeables work well for a year to 18 months, but make no mistake, they do wear down with repeated charging. Also, rechargeables tend to go flat sharply instead of gradually going down like regular batteries.

Alternatively, you can pick up regular AA batteries on Amazon and others at pretty low prices. The Amazon brand is about $15 for a 48 pack. That's pretty cheap.

I guess it may depend on your volume of usage.

I know that there is the disposal issue with batteries of either type, so that may be a factor in your decision making.

 Thank you very much for that Tom. My BR600 require six AAs, Micro-Cube requires six AAs, I have a half-dozen small flashlights that use a single AA, and so on. I really believe it will be cheaper in the long run. I have some 18650s that I've had for years that still work fine, but they are not Chinese-made.  (I do not buy from Amazon due to their corruption and political aspirations. Same with China.) I've been looking at Panasonic and others from Japan, Taiwan, etc. and mainly need to know where there are good prices. The prices here in Kalifornistan are outrageous.

18650’s are the only ones on the list that are volatile, but it’d take a lot to make a fire with the other batteries? If you’re not trying to be portable, then wall warts are the way to go? One purchase, no charging, no voltage drop off? I hate to rain in your parade, but Panasonic is a Japanese company, but manufacted in China? Oh, and you know Taiwan is part of China , right? My only problem with battery amps is that they normally require 4 or more batteries, which could be expensive if you’re playing everyday, even if it’s a yearly cost. Good luck on this :)

 Dag nabbit!

Good to know about the 18650 being the only ones to play railroad flare. Any others?

Bad to know about Panasonic. Grrr. I was really wanting to go the battery route on a few that I'd like to try to sell, (once I either figure out how to build them or just buy the boards), but I guess there isn't much of an option to doubling the weight of my amps by adding six AAs. I thought it might make the amps more attractive to purchase if they included rechargeables. Grrr. Again. 

 Taiwan has some autonomy from China and has long been a friendly trading partner. I can't say that about China. Yes, unfortunately, China claims "ownership" now and will soon move to remove that autonomy. 

 Thanks for the info there Brian. Not what I wanted to hear, but I need the truth. Grrr. (Just for effect) hehehe

Yes, Samsung, Panasonic & Sony batteries are made in the same factory, I never knew they were made elsewhere until I really looked at the writing on them? As long as they work good it doesn’t matter where they’re made to me, Donald Trump’s stuff isn’t made here either, but people are buying it, so go figure :)

 I'm not those people. Thank you very much for the info Brian. You've been tons of help.

To dispose of batteries, you can take them to Home Depo, Lowes, and some other places, maybe see if Walmart takes them. This is for any type batteries.

Another option is to use a rechargeable laptop usb style battery, some of the newer battery amps are using this technology. But you would have to add a usb module to it, maybe a little ambitious? 

Well Brian, I don't know if it is "ambitious" or just pure family stubbornness. IF I have more stubbornness than I have incompetence, then I might be able to get this down. Ha! We shall see.

 Thank you for your idea there, that just might be the ticket. Or something like it... 

Thank you Keith. Our local trash company picks them up for us, but I'll keep that in mind if they stop that. They might...

If you get Nickel Metal Hydride NiMh rechargeables they will go 500 charge cycles if you treat them decently.  We use them in our products, a ton better than the older Nickel Metal Cadmium NiCd.  Don't leave either on the charger a long time, top them off and stop, that is a huge life saver.  Run them all the way down at least once in a while.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor


Recommended Links & Resources


Forum

Cigar Box Amp Mods

Started by Cigar Box Nation in Feature Articles. Last reply by RTZGUITARS on Friday. 14 Replies

Blog Posts

Mr. Bells

Posted by Stephen Cohen on September 4, 2021 at 12:30pm 0 Comments

Bookie's Poor Man's Dobro

Posted by Steve Bookout on July 18, 2021 at 2:04pm 4 Comments

Get your groove on for free

Posted by François on July 13, 2021 at 3:05pm 1 Comment

Latest Activity

Uncle John posted photos
35 minutes ago
Uncle John commented on Vern Hallett's photo
Thumbnail

HHM2

"Ummm. Beautiful. Nice pic and background. High 9s. Our friend, Mr. Lynas would have approved."
37 minutes ago
Uncle John commented on Vern Hallett's photo
Thumbnail

HHM4

"Nice job."
38 minutes ago
Uncle John commented on Vern Hallett's photo
Thumbnail

HHM5

"Gees. The string separation and 'hold down' are critical and that setup has to make it…"
39 minutes ago
Uncle John commented on Jerry Jordan's photo
Thumbnail

Building resumed

" l sure like this pic.  Very cool and functional setup.  Love that saw.   "
42 minutes ago
Uncle John commented on Cigar Box Blues's video
Thumbnail

Gunfighter Blues - Stay Alert! ...somebody is callin' your name!

"I like how you filled in your logo/pickup cover on the building's sign.  Oh, I see the…"
44 minutes ago
Uncle John commented on Uncle John's photo
Thumbnail

Outhouse Row. Got TP? Dave L fore ground and Mose in the back.

"Oh!  I wondered about that girl.  I think she is from your collection, John Mc Nair."
1 hour ago
Jerry Jordan commented on Vern Hallett's photo
Thumbnail

HHM2

"Sweet looking build"
3 hours ago
Jerry Jordan commented on Jerry Jordan's photo
Thumbnail

Building resumed

"It’s a great saw Brian, I just make sure it only touches fingerboards"
3 hours ago
Jerry Jordan commented on Jerry Jordan's photo
Thumbnail

Building resumed

"This little rig works well enough I don’t use my store bought mitre saws… I just…"
3 hours ago
Cigar Box Blues commented on Uncle John's photo
Thumbnail

Outhouse Row. Got TP? Dave L fore ground and Mose in the back.

"I remeber that one! here is the girl : )"
8 hours ago
Cigar Box Blues posted a video

Gunfighter Blues - Stay Alert! ...somebody is callin' your name!

In memory of Dave Lynas - This world will miss you!- from the website https://www.reddogguitars.com There is CBGs for sale and more cigar box music#cigarbo...
8 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->